| 2023-05-31 09:36:27 | JONATHAN BROOKS JR. |
| | BUILDING PLANS EXAMINER |
| | WORK HOURS: MONDAY - FRIDAY 7:00 AM TO 3:00 PM |
| | PHONE (561) 805-6656 |
| | EMAIL: [email protected] |
| | |
| | 1ST REVIEW: FBC 2020 7TH EDITION |
| | FBC = FLORIDA BUILDING CODE, 7TH EDITION (2020) |
| | FBC B = FBC BUILDING |
| | FBC R = FBC RESIDENTIAL |
| | FBC EB = FBC EXISTING BUILDING |
| | FBC A = FBC ACCESSIBILITY |
| | FBC EC = FBC ENERGY CONSERVATION |
| | WPB A = CITY OF WEST PALM BEACH AMENMENTS TO THE FBC |
| | RESULTS: DENIED |
| | ADDRESS THE ATTACHED COMMENTS AND RE-SUBMIT |
| | TO RESUBMIT, YOU CAN EITHER DROP OFF YOUR SUBMITTAL AT |
| | CITY HALL, OR UPLOAD CORRECTIONS TO PROJECTDOX. |
| | |
| | 1. FBC B 107.2.1 SUBMITTED ROOF DIAGRAM/SKETCH APPEARS |
| | TO INDICATE REROOFING LOW/FLAT/CRICKET SLOPE AREA; IF |
| | NOT INDICATE BY PLACING AN X IN LOW/FLAT/CRICKET SLOPE |
| | AREAS; IF TO RECEIVE NEW ROOFING PROVIDE A COMPLETE SET |
| | OF 2020 CODE VERSION PRODUCT APPROVALS/NOA'S FOR THE |
| | PROPOSED FLAT ROOF SYSTEM TO BE USED. INCLUDE COVER |
| | PAGE, EVALUATION REPORTS AND INSTALLATION INSTRUCTIONS |
| | FOR SYSTEM USED. ALL APPLICABLE DETAILS AND ATTACHMENTS |
| | MUST BE CLEARLY IDENTIFIED ON THE PRODUCT APPROVAL |
| | DRAWINGS. DETAILS AND ATTACHMENTS NOT SPECIFICALLY |
| | COVERED IN PRODUCT APPROVALS WILL NEED SITE-SPECIFIC |
| | ENGINEERING. |
| | 2. FBC R 301 FAC9N-3. MECHANICAL TILE INSTALLATION. |
| | PLEASE PROVIDE TABLE 3, PAGE #31 MECHANICAL FASTENING |
| | FOR CONCRETE AND CLAY TILES OF THE FLORIDA HIGH WIND |
| | CONCRETE AND CLAY TILE INSTALLATION MANUEL 6TH EDITION. |
| | PLEASE INDICATE (HIGHLIGHT/CIRCLE) THE FOLLOWING: DECK |
| | THICKNESS; METHOD; FASTENER TYPE; ATTACHMENT |
| | DESCRIPTION; LOW, MEDIUM OR HIGH USING TABLE 2 HC PAGE |
| | #26 OF THE FLORIDA HIGH WIND CONCRETE AND CLAY TILE |
| | INSTALLATION MANUEL 6TH EDITION. ALL APPLICABLE DETAILS |
| | AND ATTACHMENTS MUST BE CLEARLY IDENTIFIED. REQUIRED IF |
| | THE MECHANICAL FASTENING RESISTANCE VALUES ARE NOT |
| | LISTED IN THE PRODUCT APPROVAL/NOA. |
| | 3. FBC R 301 FAC9N-3. PROVIDE A COMPLETE SET OF 2020 |
| | CODE VERSION PRODUCT APPROVALS/NOA'S FOR THE PROPOSED |
| | HIP & RIDGE METAL TO BE USED. (FL5374-R6) |
| | |
| | PLEASE NOTE THAT SUBMITTAL OF ADDITIONAL AND/OR REVISED |
| | MATERIALS MAY RESULT IN NEW PLAN REVIEW COMMENTS. |
| | |
