| 2022-05-13 11:57:48 | JONATHAN BROOKS JR. |
| | BUILDING PLANS EXAMINER |
| | WORK HOURS: MONDAY - FRIDAY 7:00 AM TO 3:00 PM |
| | PHONE (561) 805-6656 |
| | EMAIL: [email protected] |
| | |
| | 1ST REVIEW: FBC 2020 7TH EDITION |
| | FBC = FLORIDA BUILDING CODE, 7TH EDITION (2020) |
| | FBC B = FBC BUILDING |
| | FBC R = FBC RESIDENTIAL |
| | FBC EB = FBC EXISTING BUILDING |
| | FBC A = FBC ACCESSIBILITY |
| | FBC EC = FBC ENERGY CONSERVATION |
| | WPB A = CITY OF WEST PALM BEACH AMENMENTS TO THE FBC |
| | RESULTS: DENIED |
| | ADDRESS THE ATTACHED COMMENTS AND RE-SUBMIT |
| | TO RESUBMIT, YOU CAN EITHER DROP OFF YOUR SUBMITTAL AT |
| | CITY HALL, OR EMAIL [email protected]. |
| | |
| | 1. FBC B 107.2.1 SUBMITTED PRODUCT APPROVAL FL5259-R35 |
| | SELECTED PRODUCT POLYSTICK TU MAX; TILE ADHESIVE SET; |
| | MECHANICALLY ATTACHED BASE SHEET SELECTED SYSTEM #14 |
| | MAXIMUM DESIGN PRESSURE = -45PSF DOES NOT MEET OR |
| | EXCEED THE MINIMUM DESIGN PRESSURE REQUIREMENTS FOR A |
| | HIP ROOF; 6/12 ROOF SLOPE MINIMUM DESIGN PRESSURE |
| | REQUIREMENT OF -70 AS PER CHAPTER 3 OF THE 2020 FBC |
| | RESIDENTIAL. SELECT SYSTEM THAT MEETS OR EXCEEDS THIS |
| | REQUIREMENT. ALL APPLICABLE DETAILS AND ATTACHMENTS |
| | MUST BE CLEARLY IDENTIFIED ON THE PRODUCT APPROVAL |
| | DRAWINGS. |
| | 2. FBC B 107.2.1 SUBMITTED PRODUCT APPROVAL FL12328-R9 |
| | SELECTED UNDERLAYMENT TYPE; TW SEAM TAPE IS NOT |
| | APPROVED FOR USE IN AN ADHESIVE SET; CLAY AND CONCRETE |
| | TILE ROOF COVER OPTION AS PER TABLE 1 PAGE #3. SELECT |
| | UNDERLAYMENT TYPE PAGE 3 THAT IS APPROVED FOR USE IN A |
| | CLAY AND CONCRETE TILE ROOF COVER INSTALLATION. ALL |
| | APPLICABLE DETAILS AND ATTACHMENTS MUST BE CLEARLY |
| | IDENTIFIED ON THE PRODUCT APPROVAL DRAWINGS. |
| | 3. FBC R 301 FAC9N-3 FLORIDA STATE PRODUCT APPROVAL |
| | FL7849-R16 IS INCOMPLETE, PROVIDE THE FOLLOWING |
| | ADDITIONAL INFORMATION: EVALUATION REPORT PAGES 1-7 TO |
| | INCLUDE LIMITATIONS PAGE(S). THE EVALUATION REPORTS CAN |
| | BE PRINTED FROM THE SUMMARY OF PRODUCTS LOCATED AT THE |
| | BOTTOM OF THE COVER PAGE. PRINT PAGES 1-7 ONLY. |
| | 4. FBC R 301 FAC9N-3. PROVIDE A COMPLETE SET OF 2020 |
| | CODE VERSION PRODUCT APPROVALS/NOA'S FOR THE PROPOSED |
| | HIP & RIDGE METAL TO BE USED. (FL5374-R6) |
| | |
| | PLEASE NOTE THAT SUBMITTAL OF ADDITIONAL AND/OR REVISED |
| | MATERIALS MAY RESULT IN NEW PLAN REVIEW COMMEMTS. |
| | |
