Plan Review Details - Permit 21020712
Plan Review Stops For Permit 21020712
Review Stop B BUILDING (STRUCTURAL)
Rev No 3 Status P Date 2021-05-10 Cont ID  
Sent By rmcdouga Date 2021-05-10 Time 13:45 Rev Time 0.00
Received By rmcdouga Date 2021-05-10 Time 13:45 Sent To  
Notes
***NONE***
Review Stop B BUILDING (STRUCTURAL)
Rev No 2 Status P Date 2021-03-22 Cont ID  
Sent By rmcdouga Date 2021-03-22 Time 10:20 Rev Time 0.00
Received By rmcdouga Date 2021-03-22 Time 10:20 Sent To  
Notes
***NONE***
Review Stop B BUILDING (STRUCTURAL)
Rev No 1 Status F Date 2021-03-11 Cont ID  
Sent By rmcdouga Date 2021-03-11 Time 07:44 Rev Time 0.00
Received By rmcdouga Date 2021-03-11 Time 07:35 Sent To  
Notes
2021-03-11 07:50:29PLAN
 REVIEW COMMENTS
  
 1ST REVIEW: FBC SEVENTH EDITION (2020)
 ROBERT MCDOUGAL, CBO
 COMMERCIAL COMBINATION PLANS EXAMINER
 (561) 805-6714
 [email protected]
  
 DENIED BY BUILDING
 PLEASE ADDRESS THE ITEMS NOTED BELOW:
  
 1) THE VALUATION OF $2450.00 IS LOW FOR THIS SIGN.
 BASED ON MARSHALL & SWIFT THE VALUE FOR PERMITTING
 PURPOSES IS $6655.00. FBC AMENDMENTS 109.3 BUILDING
 PERMIT VALUATION. FOR PERMITTING PURPOSES, VALUATION OF
 BUILDINGS AND SYSTEMS SHALL BE TOTAL REPLACEMENT VALUE
 TO INCLUDE STRUCTURAL, ELECTRIC, PLUMBING, MECHANICAL,
 INTERIOR FINISH, RELATIVE SITE WORK, ARCHITECTURAL AND
 DESIGN FEES, MARKETING COSTS, OVERHEAD AND PROFIT;
 EXCLUDING ONLY LAND VALUE. VALUATION REFERENCES MAY
 INCLUDE THE LATEST PUBLISHED DATA OF NATIONAL
 CONSTRUCTION COST ANALYSIS SERVICES (MARSHALL-SWIFT,
 MEANS, ETC.), AS PUBLISHED BY INTERNATIONAL CODE
 CONGRESS. FINAL BUILDING PERMIT VALUATION SHALL BE SET
 BY THE BUILDING OFFICIAL.
  
  
Review Stop E ELECTRICAL
Rev No 2 Status P Date 2021-05-10 Cont ID  
Sent By jleahy Date 2021-05-10 Time 07:04 Rev Time 0.00
Received By jleahy Date 2021-05-10 Time 06:56 Sent To  
Notes
***NONE***
Review Stop E ELECTRICAL
Rev No 1 Status P Date 2021-02-23 Cont ID  
Sent By fgiaquin Date 2021-02-23 Time 20:36 Rev Time 0.00
Received By fgiaquin Date 2021-02-23 Time 19:44 Sent To  
Notes
***NONE***
Review Stop I INCOMING/PROCESSING
Rev No 3 Status N Date 2021-05-10 Cont ID  
Sent By rmcdouga Date 2021-05-10 Time 13:45 Rev Time 0.00
Received By rmcdouga Date 2021-05-03 Time 07:02 Sent To  
Notes
***NONE***
Review Stop I INCOMING/PROCESSING
Rev No 2 Status N Date 2021-04-28 Cont ID  
Sent By jleahy Date 2021-04-28 Time 15:49 Rev Time 0.00
Received By jleahy Date 2021-04-09 Time 09:35 Sent To  
Notes
***NONE***
Review Stop I INCOMING/PROCESSING
Rev No 1 Status N Date 2021-03-16 Cont ID  
Sent By medwards Date 2021-03-16 Time 07:26 Rev Time 0.00
Received By medwards Date 2021-02-16 Time 14:16 Sent To  
Notes
***NONE***
Review Stop SIGNATURE ELECTRONIC SIGNATURE SHEET
Rev No 3 Status P Date 2021-05-10 Cont ID  
Sent By jleahy Date 2021-05-10 Time 07:05 Rev Time 0.00
Received By jleahy Date 2021-05-10 Time 07:05 Sent To  
Notes
***NONE***
Review Stop SIGNATURE ELECTRONIC SIGNATURE SHEET
Rev No 2 Status P Date 2021-04-28 Cont ID  
Sent By jleahy Date 2021-04-28 Time 15:49 Rev Time 0.00
Received By jleahy Date 2021-04-28 Time 15:49 Sent To  
Notes
***NONE***
Review Stop SIGNATURE ELECTRONIC SIGNATURE SHEET
Rev No 1 Status P Date 2021-02-18 Cont ID  
Sent By dbattles Date 2021-02-18 Time 16:37 Rev Time 0.00
Received By dbattles Date 2021-02-18 Time 16:37 Sent To  
Notes
2021-02-18 16:37:44HARD COPY WAS PROVIDED.
Review Stop Z ZONING
Rev No 3 Status P Date 2021-05-05 Cont ID  
Sent By eschneid Date 2021-05-05 Time 10:54 Rev Time 0.25
Received By eschneid Date 2021-05-04 Time 13:41 Sent To  
Notes
2021-05-05 10:57:20PERMITTED: 32.75 SF
 PROPOSED: 22.39 SF
  
 SIGN GRANTED WAIVER II TO EXCEED 40% OF THE STOREFRONT
 LENGTH.
Review Stop Z ZONING
Rev No 2 Status F Date 2021-04-26 Cont ID  
Sent By eschneid Date 2021-04-26 Time 18:03 Rev Time 0.25
Received By eschneid Date 2021-04-26 Time 17:25 Sent To  
Notes
2021-04-26 18:03:54FAILED
  
 1ST FLOOR FASCIA IDENTITY SIGN
  
 1) THE ROSEMARY SQUARE TENANT SIGN CRITERIA REQUIRE
 THAT REVERSE CHANNEL LETTERS ARE FABRICATED OUT OF
 ALUMINUM WITH A MINIMUM METAL THICKNESS OF .060 INCHES.
 WHILE THIS IS NOTED ON SHEET A1, IT IS NOT UPDATED ON
 SHEET A3, WHICH IS SIGNED BY THE ENGINEER. SHEET A3
 STILL SHOWS THE ALUMINUM RETURNS AS ONLY HAVING A
 THICKNESS OF .050 INCHES.
  
 2) PROVIDE HOW THE SHIELDED LED CABLE CONDUITS TO THE
 REMOTE LED DRIVER ASSEMBLY LOCATED INSIDE THE STORE
 WILL BE CONCEALED AND NOT VISIBLE TO THE PUBLIC AS THEY
 CROSS THE ARCADE AS REQUIRED BY THE ROSEMARY SQUARE
 TENANT SIGN CRITERIA. THIS INCLUDES ANY BELL BOX, J BOX
 OR OTHER ELECTRICAL CONNECTION. IF THE CONDUIT, ETC. IS
 IN THE ARCADE CEILING YOU MAY PROVIDE THIS INFORMATION
 AS A NOTE ON THE PLANS.
  
 CONTACT ERIC SCHNEIDER @ (561) 822-1446
 [email protected]
  
Review Stop Z ZONING
Rev No 1 Status F Date 2021-03-15 Cont ID  
Sent By eschneid Date 2021-03-15 Time 15:33 Rev Time 0.75
Received By eschneid Date 2021-03-15 Time 15:33 Sent To  
Notes
2021-03-15 15:36:59FAILED
  
 1ST FLOOR FASCIA IDENTITY SIGN
  
 PROVIDE WRITTEN RESPONSES TO COMMENTS.
  
 1) THE ROSEMARY SQUARE TENANT SIGN CRITERIA MEASURES
 SIGNAGE ALLOWANCE AS FOLLOWS - ONE SQUARE FOOT OF
 SIGNAGE FOR EACH ONE LINEAR FOOT OF STORE FRONTAGE.
 SINCE THIS SIGN IS ON THE 1ST FLOOR, THE SIZE OF THE
 SIGN IS BASED ON THE 1ST FLOOR FRONTAGE. PROVIDE THE
 LINEAR FEET OF 1ST FLOOR STORE FRONTAGE (APPEARS TO BE
 APPROXIMATELY 30 FEET) SO THAT STAFF CAN VERIFY HOW
 MUCH SIGN SQUARE FOOTAGE IS PERMITTED. BASED ON A 30
 FOOT FRONTAGE, THE FASCIA IDENTITY SIGN AT 22.39 SQUARE
 FEET IS PERMITTED.
  
 2) THE ROSEMARY SQUARE TENANT SIGN CRITERIA PERMIT A
 FASCIA IDENTITY SIGN TO HAVE A MAXIMUM WIDTH OF 40
 PERCENT OF THE STOREFRONT FRONTAGE. ONCE THE 1ST FLOOR
 STORE FRONTAGE DIMENSION IS PROVIDED, THEN STAFF CAN
 VERIFY IF THE PROPOSED 1ST FLOOR FASCIA IDENTITY SIGN
 MEETS THIS STANDARD. HOWEVER, BASED ON THE SITE PLAN,
 IT APPEARS THAT THE 1ST FLOOR FRONTAGE IS APPROXIMATELY
 30 FEET, WHICH WOULD ONLY PERMIT A SIGN DIMENSION OF 12
 FEET BY RIGHT. THE PROPOSED 14 FOOT 4.5 INCH LONG SIGN
 EXCEEDS THE 40 PERCENT ALLOWANCE. THE SIGN WIDTH
 DIMENSION MAY BE INCREASED BY 25 PERCENT WITH THE
 APPROVAL OF A WAIVER II, WHICH WOULD PERMIT A SIGN UP
 TO 15 FEET IN LENGTH. A WAIVER II REQUIRES THE
 SUBMITTAL OF A MINOR PLANNED DEVELOPMENT AMENDMENT TO
 THE CITY'S PLANNING DIVISION AND ITS SUBSEQUENT
 APPROVAL. NOTE: EXACT DIMENSIONS WILL BE BASED ON THE
 ACTUAL 1ST FLOOR FRONTAGE THAT HAS NOT YET BEEN
 PROVIDED.
  
 3) THE ROSEMARY SQUARE TENANT SIGN CRITERIA REQUIRE
 THAT REVERSE CHANNEL LETTERS ARE FABRICATED OUT OF
 ALUMINUM WITH A MINIMUM METAL THICKNESS OF .060 INCHES.
 THE SIGN DETAIL SHOWS THE ALUMINUM RETURNS AS ONLY
 HAVING A THICKNESS OF .050 INCHES.
  
 CONTACT ERIC SCHNEIDER @ (561) 822-1446
 [email protected]
  


Account Summary | Usage Policy | Privacy Policy
Copyright © 2005 – 2014, SunGard Pentamation, Inc & City of West Palm Beach, FL – All Rights Reserved