| 2019-03-20 09:17:43 | PLAN |
| | REVIEW COMMENTS |
| | |
| | 1ST REVIEW: FBC SIXTH EDITION (2017) |
| | ROBERT MCDOUGAL, CBO |
| | COMMERCIAL COMBINATION PLANS EXAMINER |
| | (561) 805-6714 |
| | [email protected] |
| | |
| | DENIED BY BUILDING |
| | PLEASE ADDRESS THE ITEMS NOTED BELOW: |
| | |
| | 1) THE VALUE OF THE WORK THAT IS SPECIFIED ON THE |
| | PERMIT APPLICATION OF $6000.000 APPEARS TO BE LOW. |
| | SUBMIT A COPY OF THE SIGNED CONTRACT TO VERIFY THE |
| | VALUE. FBC 109.3 BUILDING PERMIT VALUATION. FOR |
| | PERMITTING PURPOSES, VALUATION OF BUILDINGS AND SYSTEMS |
| | SHALL BE TOTAL REPLACEMENT VALUE TO INCLUDE STRUCTURAL, |
| | ELECTRIC, PLUMBING, MECHANICAL, INTERIOR FINISH, |
| | RELATIVE SITE WORK, ARCHITECTURAL AND DESIGN FEES, |
| | MARKETING COSTS, OVERHEAD AND PROFIT; EXCLUDING ONLY |
| | LAND VALUE. VALUATION REFERENCES MAY INCLUDE THE LATEST |
| | PUBLISHED DATA OF NATIONAL CONSTRUCTION COST ANALYSIS |
| | SERVICES (MARSHALL-SWIFT, MEANS, ETC.), AS PUBLISHED BY |
| | INTERNATIONAL CODE CONGRESS. FINAL BUILDING PERMIT |
| | VALUATION SHALL BE SET BY THE BUILDING OFFICIAL. |
| | |
| | 2) THE POLYGLASS FULLY BONDED ASSEMBLY FOR WOOD DECKS |
| | THAT YOU SELECTED, W-1 ON PAGE 5 OF 58, HAS A MAXIMUM |
| | DESIGN PRESSURE OF -52.5 PSF. THIS PRESSURE IS NOT |
| | ADEQUATE TO RESIST THE REQUIRED UPLIFTS IN THE CORNER |
| | AND PERIMETER AREAS OF THE ROOFS. LIMITATION NUMBER 5.8 |
| | ON PAGE 5 OF 6 OF THE PRODUCT APPROVAL DOES NOT PERMIT |
| | ANY INCREASE TO THE DESIGN PRESSURE. YOU WILL HAVE TO |
| | SPECIFY ANOTHER ASSEMBLY WITH ADEQUATE DESIGN PRESSURES |
| | OR ONE THAT ALLOWS ENHANCED FASTENING WITH SIGNED AND |
| | SEALED CALCULATIONS. FBC 301.2.1 |
