Plan Review Details - Permit 19020089
Plan Review Stops For Permit 19020089
Review Stop B BUILDING (STRUCTURAL)
Rev No 2 Status P Date 2019-03-08 Cont ID  
Sent By rmcdouga Date 2019-03-08 Time 10:43 Rev Time 0.00
Received By rmcdouga Date 2019-03-08 Time 10:24 Sent To I
Notes
***NONE***
Review Stop B BUILDING (STRUCTURAL)
Rev No 1 Status P Date 2019-02-13 Cont ID  
Sent By rmcdouga Date 2019-02-13 Time 06:38 Rev Time 0.00
Received By rmcdouga Date 2019-02-13 Time 06:25 Sent To  
Notes
***NONE***
Review Stop E ELECTRICAL
Rev No 2 Status P Date 2019-03-07 Cont ID  
Sent By jleahy Date 2019-03-07 Time 13:23 Rev Time 0.00
Received By jleahy Date 2019-03-07 Time 13:23 Sent To  
Notes
***NONE***
Review Stop E ELECTRICAL
Rev No 1 Status P Date 2019-02-08 Cont ID  
Sent By jleahy Date 2019-02-08 Time 15:45 Rev Time 0.00
Received By jleahy Date 2019-02-08 Time 15:45 Sent To  
Notes
***NONE***
Review Stop I INCOMING/PROCESSING
Rev No 2 Status N Date 2019-03-08 Cont ID  
Sent By rmcdouga Date 2019-03-08 Time 10:43 Rev Time 0.00
Received By rmcdouga Date 2019-03-05 Time 15:00 Sent To  
Notes
2019-03-06 15:00:40RESUB ROUTED TO JLEAHY
Review Stop I INCOMING/PROCESSING
Rev No 1 Status N Date 2019-02-23 Cont ID  
Sent By tklarge Date 2019-02-23 Time 10:48 Rev Time 0.00
Received By tklarge Date 2019-02-04 Time 13:14 Sent To  
Notes
2019-02-05 13:14:42ROUTED TO ZONING INBOX
Review Stop P PLUMBING
Rev No 2 Status P Date 2019-03-08 Cont ID  
Sent By tklarge Date 2019-03-08 Time 09:31 Rev Time 0.00
Received By tklarge Date 2019-03-08 Time 09:03 Sent To  
Notes
***NONE***
Review Stop P PLUMBING
Rev No 1 Status F Date 2019-02-23 Cont ID  
Sent By tklarge Date 2019-02-23 Time 10:47 Rev Time 0.00
Received By tklarge Date 2019-02-23 Time 10:34 Sent To I
Notes
2019-02-23 10:47:461) SUBMIT MANUF. SPECS FOR THE WOK POT WATER FEATURE
 BOWLS. WPB AMEND. TO FBC SEC. 107.2.1.
 2) SUBMIT TOTAL DYNAMIC HEAD CALCULATIONS FOR THE
 MAXIMUM SYSTEM FLOW. THE MAXIMUM FLOW OF THE PUMP FROM
 ITS PUMP CURVE IS NO LONGER ALLOWED TO BE USED IN
 DETERMINING MAXIMUM SYSTEM FLOW RATE PER ANSI/APSP/ICC
 7 - 2013 SECS. 4.4.9, 4.4.9.1. THE 2013 EDITION
 ADDRESSES FLOW RATE IN GALLONS PER MINUTE (GPM). IT
 REQUIRES THAT MAXIMUM SYSTEM FLOW RATE DOES NOT EXCEED
 THE LISTED MAXIMUM FLOW RATE OF THE SUCTION OUTLET
 FITTING ASSEMBLY (DRAIN COVER).THE TDH CALCULATIONS
 MUST INCLUDE ALL OF THE SYSTEM COMPONENTS INCLUDING
 SUCTION AND RETURN PIPING, FITTINGS, VALVES, HEATER,
 FILTER, AND CHLORINATOR. ALL SYSTEM COMPONENTS EXCEPT
 THE PUMP.
  
 SUBMIT TWO LEGIBLE COPIES OF THE POOL PUMP CURVE.
 IDENTIFY ON THE PUMP CURVE WHICH CURVE KEY IS SPECIFIC
 TO THE PUMP BEING INSTALLED ON THIS POOL. THIS IS
 NEEDED TO CONFIRM THE MAXIMUM SYSTEM FLOW FROM THE TDH
 CALCULATIONS. ANSI/APSP/ICC 7 - 2013 SECS. 4.4.9,
 4.4.9.1
  
 TIM LARGE
 CHIEF PLUMBING INSPECTOR
 PLUMBING PLAN REVIEW
 561-805-6692
 [email protected]
  
  
  
Review Stop Z ZONING
Rev No 1 Status P Date 2019-02-06 Cont ID  
Sent By mcruz Date 2019-02-06 Time 16:05 Rev Time 0.00
Received By mcruz Date 2019-02-06 Time 15:34 Sent To  
Notes
2019-02-06 16:05:49ZONING PASSED WITH PROVISO: POOL EQUIMENT SHALL BE AT
 LEAST 3.5' FROM SIDE PROPERTY LINE.


Account Summary | Usage Policy | Privacy Policy
Copyright © 2005 – 2014, SunGard Pentamation, Inc & City of West Palm Beach, FL – All Rights Reserved