| 2018-08-14 14:00:00 | PLAN |
| | REVIEW COMMENTS |
| | |
| | 1ST REVIEW: FBC FIFTH EDITION (2014) |
| | ROBERT MCDOUGAL, CBO |
| | COMMERCIAL COMBINATION PLANS EXAMINER |
| | (561) 805-6714 |
| | [email protected] |
| | |
| | DENIED BY BUILDING |
| | PLEASE ADDRESS THE ITEMS NOTED BELOW: |
| | |
| | 1) THE SHORING/RESHORING PLANS ARE REQUIRED TO BE |
| | SIGNED AND SEALED BY THE ENGINEER. THE PLANS THAT WERE |
| | SUBMITTED HAVE A DIGITAL SIGNATURE WHICH IS ONLY |
| | ACCEPTABLE FOR ELECTRONICALLY SUBMITTED PLANS. |
| | 61G15-23.003 PROCEDURES FOR PHYSICALLY SIGNING AND |
| | SEALING PLANS, SPECIFICATIONS, REPORTS OR OTHER |
| | DOCUMENTS. ENGINEERING PLANS, SPECIFICATIONS, REPORTS |
| | OR OTHER DOCUMENTS WHICH MUST BE SIGNED, DATED AND |
| | SEALED IN ACCORDANCE WITH THE PROVISIONS OF SECTION |
| | 471.025, F.S., AND RULE 61G15-23.001, F.A.C. MUST BE |
| | PHYSICALLY SIGNED, DATED AND SEALED AS PROVIDED HEREIN |
| | BY THE PROFESSIONAL ENGINEER IN RESPONSIBLE CHARGE. |
| | (1) THE LICENSEE SHALL SIGN BY HAND AN ORIGINAL OF THE |
| | LICENSEE?S SIGNATURE ON EACH PAGE REQUIRED TO BE |
| | SEALED. A SCANNED, FACSIMILE, DIGITALLY CREATED OR |
| | COPIED IMAGE OF THE LICENSEE?S SIGNATURE SHALL NOT BE |
| | USED. |
| | (2) THE LICENSEE MUST THEN USE A WET SEAL, A DIGITALLY |
| | CREATED SEAL, OR AN EMBOSSING SEAL PLACED PARTIALLY |
| | OVERLAPPING THE LICENSEE?S SIGNATURE ON EACH PAGE |
| | REQUIRED TO BE SEALED. THE PLACEMENT OF THE SEAL SHALL |
| | NOT RENDER THE SIGNATURE ILLEGIBLE. |
| | |
| | 2) PROVISO ITEM: PROVIDE THE RESUME AND LICENSE |
| | INFORMATION FOR THE ENGINEER THAT WILL INSPECT THE |
| | SHORING AND RESHORING TO THE FIELD INSPECTOR. |
| | FBC110.8.2 |
| | |
