City of West Palm Beach eGovPlus

Plan Review Details - Permit 16100828

Plan Review Stops For Permit 16100828

Review Stop	B			BUILDING (STRUCTURAL)
Rev No	1	Status	F	Date	2016-11-18			Cont ID
Sent By	shill			Date	2016-11-18	Time	14:40	Rev Time	0.00
Received By	shill			Date	2016-11-18	Time	14:40	Sent To

Notes

2016-11-18 14:48:50	**CORRECTIONS**

	SAMANTHA HILL
	BUILDING PLANS EXAMINER
	[email protected]
	561-805-6724

	1. PROVIDE A PLAN FOR THE PROPOSED INSTALLATION. PLAN
	IS TO CLEARLY SHOW CODE COMPLIANCE. THIS BUILDING IS
	MIXED USE, SO IS GOVERNED BY THE FLORIDA BUILDING CODE,
	BUILDING.

	THE PLAN SHOULD INCLUDE INFORMATION SUCH AS LOCATION,
	HOW IT AFFECTS EXITING (THIS APPEARS TO OBSTRUCT THE
	STAIRS), FLOOR PLAN, OCCUPANCY CLASSIFICATION FOR ALL
	AREAS. IT IS NOT CLEAR IF THIS INSTALLATION CAN BE
	PERMITTED IN A COMMERCIAL BUILDING.

	FBC 107; FBC CHAPTER 10; NOT ENOUGH INFORMATION PROVDED
	TO GIVE A COMPLETE CHECKLIST

	2. THE PLAN IS TO INCLUDE THE NAME AND SIGNATURE OF THE
	INDIVIDUAL TAKING RESPONSIBILITY FOR THE DESIGN, FBC
	107.

	3. PLAN / PERMIT DOCUMENTS ARE TO SHOW COMPLIANCE WITH
	FBC 5TH EDITION BUILDING CHAPTER 30.

Review Stop	E			ELECTRICAL
Rev No	1	Status	F	Date	2016-11-16			Cont ID
Sent By	mvaldes			Date	2016-11-16	Time	13:57	Rev Time	0.00
Received By	mvaldes			Date	2016-11-16	Time	13:44	Sent To	B

Notes

2016-11-16 14:01:04	1ST REVIEW 2014 5TH FBC ED. NEC 2011
	MARIO VALDES
	ELECTRICAL PLAN EXAMINER
	561-805-6713
	[email protected]


	1] PROVIDE AN ELECTRICAL DETAIL TO INCLUDE WIRE &
	CONDUIT SIZE, EQUIPMENT DISCONNECT LOCATION, AND OVER
	CURRENT PROTECTION SIZE.

	2] PROVIDE MANUFACTURE SPECIFICATIONS.

Review Stop	FIRE			FIRE DEPARTMENT
Rev No	1	Status	F	Date	2016-10-28			Cont ID
Sent By	shill			Date	2016-11-18	Time	14:48	Rev Time	0.00
Received By	pleduc			Date	2016-10-27	Time	15:14	Sent To	E

Notes

2016-10-27 16:37:39	THIS PLAN WAS REVIEWED AND FAILED BY PETER LEDUC, FIRE
	MARSHAL, WITH THE FOLLOWING COMMENTS:


	THERE IS INSUFFICINET INFORMATION SUBMITTED FOR THIS
	PROJECT TO DETERMINE IF IT MEETS FIRE CODE APPROVAL FOR
	AN EXIT STAIRWAY.


	1) PLEASE PROVIDE GREATER DETAIL OF THE TRACK IN
	RELATION TO THE HANDRAIL AND INTRUSION INTO THE
	STARIWAY.

	PER NFPA 101 CHAPTER 7, MEANS OF EGRESS, THERE MUST BE
	36" OF CLEAR WIDTH.

	7.2.2.2.1 STANDARD STAIRS.

	(2)* EXISTING STAIRS SHALL BE PERMITTED TO REMAIN IN
	USE, PROVIDED THAT THEY MEET THE REQUIREMENTS FOR
	EXISTING STAIRS SHOWN IN TABLE 7.2.2.2.1.1(B).

	TABLE 7.2.2.2.1.1(B) EXISTING STAIRS DIMENSIONAL
	CRITERIA FEATURE FT/IN. MM

	MINIMUM WIDTH CLEAR OF ALL 36 IN. 915 OBSTRUCTIONS,
	EXCEPT PROJECTIONS NOT MORE THAN 4? IN. (114 MM) AT OR
	BELOW HANDRAIL HEIGHT ON EACH SIDE
	MAXIMUM HEIGHT OF RISERS 8 IN. 205
	MINIMUM TREAD DEPTH 9 IN. 230
	MINIMUM HEADROOM 6 FT 8 IN. 2030
	MAXIMUM HEIGHT BETWEEN LANDINGS 12 FT 3660
	LANDING SEE 7.2.1.3 AND 7.2.1.4.3.1.

	THE SUBMITTED DRAWINGS INDICATE LESS THAN 36". PLEASE
	CORRECT OR JUSTIFY.


	2) WHAT IS THE POWER SOURCE? PLEASE PROVIDE DETAILS.



	3) WHEN NOT IN USE, DOES THE STAIR FOLD TO A VERTICAL
	POSITION? WHAT IS THE CLEAR WIDTH WHEN THE SEAT IS
	VERTICAL?

	PLEASE PROVIDE SPECIFIC MANUFACTURES SPECS AND PLAN
	DRAWING DETAIL.



	4) WHEN AT THE FINAL TOP AND/OR BOTTOM POSTION, DOES
	THE CHAIR REMAIN IN THE EXIT PATH ?

	PLEASE PROVIDE DETAILS.


	5) PLEASE SHOW PLAN DRAWINGS OF THE ACTUAL FLOOR PLAN
	WHEN THE CHAIR IS AT THE TOP AND/OR BOTTOM.

	INCLUDE ALL DIMENSIONS TO NEAREST DOORS, WALLS,
	CORRIDORS, EXITS, ETC.


	6) ADDITIONAL COMMENTS MAY BE PROVIDED ON THE
	RE-SUBMITTAL OF THE ABOVE.



	PETER LEDUC
	FIRE MARSHAL
	561-804-4709
	[email protected]

Review Stop	I			INCOMING/PROCESSING
Rev No	1	Status	N	Date	2016-11-18			Cont ID
Sent By	shill			Date	2016-11-18	Time	14:48	Rev Time	0.00
Received By	shill			Date	2016-10-27	Time	14:16	Sent To	FIRE

Notes

2016-11-17 08:31:18	11/16 ON SH DESK