Plan Review Details - Permit 16080104
Plan Review Stops For Permit 16080104
Review Stop FIRE FIRE DEPARTMENT
Rev No 1 Status P Date 2016-08-05 Cont ID  
Sent By wjolin Date 2016-08-05 Time 09:18 Rev Time 0.00
Received By wjolin Date 2016-08-05 Time 09:17 Sent To M
Notes
2016-08-05 09:18:50BACKFLOW PREVENTER SHALL BE SUPERVISED WITH TAMPER
 SWITCHES OR LOCKED CHAIN OR BOTH.
Review Stop I INCOMING/PROCESSING
Rev No 2 Status N Date 2016-08-15 Cont ID  
Sent By tklarge Date 2016-08-15 Time 05:52 Rev Time 0.00
Received By tklarge Date 2016-08-15 Time 05:51 Sent To  
Notes
***NONE***
Review Stop I INCOMING/PROCESSING
Rev No 1 Status N Date 2016-08-08 Cont ID  
Sent By ccole Date 2016-08-08 Time 08:11 Rev Time 0.00
Received By ccole Date 2016-08-04 Time 14:30 Sent To  
Notes
***NONE***
Review Stop M MECHANICAL (A/C)
Rev No 2 Status N Date 2016-08-15 Cont ID  
Sent By tklarge Date 2016-08-15 Time 05:51 Rev Time 0.00
Received By tklarge Date 2016-08-15 Time 05:51 Sent To  
Notes
***NONE***
Review Stop M MECHANICAL (A/C)
Rev No 1 Status F Date 2016-08-08 Cont ID  
Sent By ccole Date 2016-08-08 Time 08:11 Rev Time 0.00
Received By ccole Date 2016-08-08 Time 08:11 Sent To  
Notes
2016-08-08 08:12:151ST REVIEW FBC-2014 MECHANICAL
 PERMIT #16080104
 8/8/16
  
 1) COMPLY WITH PLUMBING PLAN REVIEW COMMENTS.
  
 CHRISTOPHER L. COLE
 MECHANICAL PLANS EXAMINER
 561-805-6719
 [email protected]
  
Review Stop P PLUMBING
Rev No 2 Status P Date 2016-08-15 Cont ID  
Sent By tklarge Date 2016-08-15 Time 05:51 Rev Time 0.00
Received By tklarge Date 2016-08-15 Time 05:51 Sent To  
Notes
***NONE***
Review Stop P PLUMBING
Rev No 1 Status F Date 2016-08-04 Cont ID  
Sent By tklarge Date 2016-08-04 Time 14:30 Rev Time 0.00
Received By tklarge Date 2016-08-04 Time 14:19 Sent To  
Notes
2016-08-04 14:30:35THE SUBMITTED SPECIFICATIONS DO NOT SHOW COMPLIANCE
 WITH THE FOLLOWING:
  
 ) TWO COPIES OF THE MANUFACTURER?S SPECIFICATIONS FOR
 THE BACKFLOW PREVENTER. THE MAKE, MODEL AND SIZE OF THE
 DEVICE SHALL BE NOTED IN THE DESCRIPTION OF WORK
 SECTION ON THE PERMIT APPLICATION.
  
 2) ALL BACKFLOW DEVICES MUST BE LEAD FREE.
  
 3) ALL BACKFLOW DEVICES MUST BE ON THE UNIVERSITY OF
 SOUTHERN CALIFORNIA?S ( USC ) LIST OF APPROVED DEVICES.
 4) CONTACT FIELD CUSTOMER SERVICE AT 561-822-2240 TO
 CONFIRM IF THE DEVICE YOU ARE PURCHASING MEETS THE
 CITY?S REQUIREMENTS.
 5) BACKFLOW PREVENTION DEVICES SHALL BE LOCATED
 IMMEDIATELY AFTER THE METER AND MUST BE TESTED AND
 CERTIFIED BY THE CITY OF WEST PALM BEACH UTILITIES
 DEPARTMENT. PLEASE CONTACT THE CITY OF WEST PALM BEACH
 PUBLIC UTILITIES CENTRAL OPERATIONS AT 561-822-2210 TO
 ARRANGE FOR THE UTILITIES DEPARTMENT TO CERTIFY THE
 DEVICE.
 6) INDICATE THE SIZE OF THE DEVICE BEING INSTALLED ON
 THE SPECIFICATION SHEETS AND ALSO ON THE PERMIT
 APPLICATION.
  
 NOTE: THE PERMIT CARD AND MANUFACTURER?S SPECIFICATIONS
 SHALL BE ON THE JOBSITE FOR INSPECTION
  
 PLUMBING PLAN REVIEW
 TIM LARGE
 CHIEF PLUMBING INSPECTOR
 561-805-6692
 [email protected]
  


Account Summary | Usage Policy | Privacy Policy
Copyright © 2005 – 2014, SunGard Pentamation, Inc & City of West Palm Beach, FL – All Rights Reserved