| 2016-03-15 14:17:23 | RESIDENTIAL (R3) ALTERATION, BUILDING REVIEW COMMENTS |
| | CODE: FBC 5TH EDITION (2014) |
| | |
| | 1- ARCHITECT OF RECORD TO REVISE THE DESIGN PRESSURES |
| | FOR DOORS AND WINDOWS. DESIGN PRESSURES SHOWN ON SHEET |
| | A4 ARE TOO LOW. ACCORDING TO SEC. R301.2.1.4.3 THIS |
| | BUILDING IS LOCATED IN EXPOSURE "D". REVISE THE DESIGN |
| | PRESSURES TO CORRESPOND TO EXPOSURE "D". |
| | NOTE: PRODUCT APPROVALS SUBMITTED WILL BE REVIEWED ONCE |
| | THE REVISED DESIGN PRESSURES ARE PROVIDED. |
| | |
| | 2- PROVIDE ENERGY CALCULATIONS AS REQUIRED BY SEC. |
| | R101.4.3 OF FBC-ENERGY CONSERVATION, 5TH EDITION |
| | (2014). |
| | |
| | 3- ARCHITECT WHO IS SIGNING AND SEALING THE PLANS TO |
| | PROVIDE HIS INFORMATION IN THE TITLE BLOCK AS REQUIRED |
| | BY FAC 61G1-16.004 AND CHAPTER 481 F.S. |
| | NOTE: SEE BELOW FOR REQUIRED INFORMATION. |
| | |
| | 61G1-16.004 TITLE BLOCK. |
| | A TITLE BLOCK MUST APPEAR ON ALL ARCHITECTURAL OR |
| | INTERIOR DESIGN DRAWINGS AND SPECIFICATION |
| | IDENTIFICATION SHEETS THAT ARE REQUIRED TO BE SIGNED |
| | AND SEALED. THE TITLE BLOCK MUST, AT A MINIMUM, CONTAIN |
| | THE FOLLOWING INFORMATION: |
| | (1) FIRM NAME, ADDRESS, AND TELEPHONE NUMBER. |
| | (2) FIRM LICENSE NUMBER. |
| | (3) NAME OR IDENTIFICATION OF PROJECT. |
| | (4) DATE PREPARED. |
| | (5) A SPACE FOR THE SIGNATURE AND DATED SEAL. |
| | (6) THE PRINTED NAME AND THE LICENSE/REGISTRATION |
| | NUMBER OF THE PERSON SEALING THE DOCUMENT. |
| | (7) THE DATE OF PLANS REVISION, IF THE PLANS ARE |
| | REVISED. |
| | (8) FOR THE PURPOSES OF THIS RULE, FIRM IS DEFINED TO |
| | BE A CORPORATION, LIMITED LIABILITY COMPANY, |
| | PARTNERSHIP, PERSON PRACTICING UNDER A FICTITIOUS NAME, |
| | OR PERSON PRACTICING ARCHITECTURE OR INTERIOR DESIGN IN |
| | HIS OR HER OWN NAME. |
| | RULEMAKING AUTHORITY 481.2055, 481.221(1), (3) FS. LAW |
| | IMPLEMENTED 481.219, 481.221(1), (3) FS. HISTORY?NEW |
| | 9-7-00, AMENDED 3-16-14. |
| | |
| | 4- CLARIFY WHERE IS THE FIBERGLASS DOOR FLORIDA PRODUCT |
| | APPROVAL FL15180.19 SUBMITTED GOING TO BE INSTALLED. |
| | PLANS SUBMITTED DON'T INCLUDE THIS DOOR. SEC. 107.2.1 |
| | CITY AMENDMENTS. |
| | |
| | 5- CLARIFY WHERE IS THE CASEMENT WINDOWS NOA 15-0519.13 |
| | SUBMITTED GOING TO BE INSTALLED. PLANS SUBMITTED DON'T |
| | INCLUDE THIS DOOR. SEC. 107.2.1 CITY AMENDMENTS. |
| | |
| | 6- CLARIFY WHERE IS THE HORIZONTAL ROLLING WINDOW NOA |
| | 15-0519.09 SUBMITTED GOING TO BE INSTALLED. PLANS |
| | SUBMITTED DON'T INCLUDE THIS DOOR. SEC. 107.2.1 CITY |
| | AMENDMENTS. |
| | |
| | 7- CLARIFY TYPE OF DOOR TO BE INSTALLED IN MASTER |
| | BATHROOM AREA. STACKABLE DOOR OR SOLID DOOR. SEE FLOOR |
| | PLAN AND DOOR SCHEDULE ON SHEET A4 AND EXTERIOR |
| | ELEVATION ON SHEET A6. REVISE AS REQUIRED. SEC. 107.2.1 |
| | CITY AMENDMENTS. |
| | |
| | 8- PROVIDE PRODUCT APPROVAL (2 COPIES) AS REQUIRED BY |
| | FAC 61G20-3.002(33) FOR: |
| | A) STACKABLE DOORS AS SHOWN ON PLANS FOR LIVING AND |
| | MASTER BATH AREA. |
| | |
| | B) SINGLE HUNG WINDOWS AS SPECIFIED ON PLANS. |
| | |
| | C) FRENCH DOOR AS SPECIFIED ON PLANS AND ELEVATION FOR |
| | THE EXISTING BATHROOM. |
| | |
| | 9- DESIGNER OF RECORD TO REVIEW AND APPROVE IN WRITING |
| | (NOT SIGNING AND SEALING) ALL PRODUCT APPROVALS AS |
| | REQUIRED BY SEC. 107.3.4.1 CITY AMENDMENTS. |
| | |
| | ***PLEASE PROVIDE RESPONSE LETTER ADDRESING EACH |
| | COMMENT TO EXPEDITE THE REVIEW PROCESS. |
| | |
| | IF YOU HAVE ANY QUESTIONS, PLEASE CONTACT |
| | JULIO GOMEZ |
| | COMMERCIAL COMBINATION PLANS EXAMINER |
| | DEVELOPMENT SERVICES DEPARTMENT |
| | (561)805-6712 |
| | [email protected] |
| | |
| | |
| | |
| | |
| | |
