| 2015-07-17 13:47:18 | ****CORRECTIONS**** |
| | |
| | SAMANTHA HILL, BUILDING PLANS EXAMINER |
| | 561-805-6724 |
| | [email protected] |
| | |
| | 1. TWO COMPLETE COLLATED SETS OF DOCUMENTS REQUIRED FOR |
| | PERMIT ISSUANCE, FBC 107. PROVIDE THE FOLLOWING: |
| | |
| | 2. PROVIDE A FLOOR PLAN SHOWING: WINDOW LOCATIONS, |
| | SIZES, WINDOW TYPE, ROOM DESIGNATIONS. |
| | |
| | 3. FOR BEDROOM WINDOWS WHICH ARE LESS THAN 51" IN |
| | HEIGHT, NOTE EXISTING CONDITIONS (TYPE OF WINDOW) AND |
| | OPENING SIZE FOR BEDROOMS, FBC R310, FBC EB 704.1. THE |
| | CLEAR OPENING CANNOT BE REDUCED BY MORE THAN 5%. |
| | |
| | TO PROVIDE FURTHER CLARIFICATION REGARDING INFORMATION |
| | NEEDED FOR BEDROOM WINDOWS WHICH ARE LESS THAN 51" IN |
| | HEIGHT: |
| | |
| | STATE WHAT TYPE OF WINDOW IS THERE NOW IN THE BEDROOMS |
| | - AWNING, CASEMENT, SINGLE HUNG? |
| | |
| | STATE WHAT THE EXISTING CLEAR OPENING DIMENSIONS ARE. |
| | CLEAR OPENING IS THE OPENING WHICH EXISTS WHEN THE |
| | WINDOW IS FULLY OPEN. |
| | |
| | STATE WHAT THE PROPOSED CLEAR OPENING DIMENSIONS ARE. |
| | THIS CAN BE OBTAINED FROM THE MANUFACTURER. |
| | |
| | 4. PROVIDE PRODUCT APPROVALS FOR THE WINDOWS AND DOORS. |
| | |
| | THE DOOR PRODUCT APPROVAL IS EXPIRED (FBC 2010); |
| | PROVIDE CURRENT APPROVAL (FBC 5TH EDITION, 2014) |
| | |
| | THE WINDOW PRODUCT APPROVAL IS FOR IMPACT WINDOWS, BUT |
| | THE APPLICATION IS FOR NON IMPACT WINDOWS |
| | |
| | 5. A KITCHEN PLAN FOR WILLIAM TUTTLE WAS SUBMITTED. IT |
| | IS UNCLEAR HOW THIS IS RELATED TO THIS WINDOW/DOOR |
| | PERMIT, FBC 107. |
| | |
| | 6. IMPACT PROTECTION REQUIRED, FBC R 301.2.1.2. PROVIDE |
| | PRODUCT APPROVALS AND, IF SHUTTERS ARE USED, COMPLETE |
| | THE SAMPLE INSTALLATION SCHEDULE (AVAILABLE IN THE |
| | LOBBY AND AT: |
| | |
| | HTTP://WPB.ORG/DEVELOPMENT/WP-CONTENT/UPLOADS/SITES/33/ |
| | 2013/09/SCHEDULE_FOR_INSTALLATION.PDF |
| | |
| | IF THIS FALLS UNDER THE 25% EXCEPTION FBC EB 706.4, |
| | PROVIDE CALCULATIONS. |
| | |
| | |
