| 2013-07-30 16:06:32 | GIVEN TO J WITMER ALONG WITH 13071064 |
| 2013-07-30 16:04:13 | PROVIDE RECPTACLE SPACING PER 210.52 |
| | (A) GENERAL PROVISIONS. IN EVERY KITCHEN, FAMILY ROOM, |
| | DINING ROOM, LIVING ROOM, PARLOR, LIBRARY, DEN, |
| | SUNROOM, BEDROOM, RECREATION ROOM, OR SIMILAR ROOM OR |
| | AREA OF DWELLING UNITS, RECEPTACLE OUTLETS SHALL BE |
| | INSTALLED IN ACCORDANCE WITH THE GENERAL PROVISIONS |
| | SPECIFIED IN 210.52(A)(1) THROUGH (A)(3). |
| | (1) SPACING. RECEPTACLES SHALL BE INSTALLED SUCH THAT |
| | NO POINT MEASURED HORIZONTALLY ALONG THE FLOOR LINE IN |
| | ANY WALL SPACE IS MORE THAN 1.8 M (6 FT) FROM A |
| | RECEPTACLE OUTLET. |
| | (2) WALL SPACE. AS USED IN THIS SECTION, A WALL SPACE |
| | SHALL INCLUDE THE FOLLOWING: |
| | (1) ANY SPACE 600 MM (2 FT) OR MORE IN WIDTH |
| | (INCLUDING SPACE MEASURED AROUND CORNERS) AND UNBROKEN |
| | ALONG THE FLOOR LINE BY DOORWAYS, FIREPLACES, AND |
| | SIMILAR OPENINGS |
| | (2) THE SPACE OCCUPIED BY FIXED PANELS IN EXTERIOR |
| | WALLS, EXCLUDING SLIDING PANELS |
| | PROVIDE ARC FAULT PROTECTION PER 210.12 |
| | PROVIDE KITCHEN SMALL APPLIANCE AND COUNTERTOP |
| | RECEPTACLES PER 210.52 B AND GFCI PROTECTION PER 210.8 |
| | PROVIDE EXTERIOR LIGHTING PER 210.70 AND SHOW EXTERIOR |
| | LIGHTING AND INDICATE METHOD OF CONTROL. |
| | PROVIDE SWITCHED OUTLETS IN EACH HABITABLE ROOM PER |
| | 210.70, NO SWITCHES ARE CURRENTLY INDICATED |
| | PROVIDE 20 AMP GFCI PROTECTED RECEPTACLE IN BATHROOM |
| | PER 210.8. NO SWITCH, LIGHT, EXHAUST OR RECEPTACLE IS |
| | INDICATED ON THE PLANS |
| | EMON METER IS A CT TYPE METER AND NOT A FEED THRU AS |
| | INDICATED ON THE DRAWING |
| | ANY RESELLING OF ELECTRICITY IS TO COMPLY WITH FLORIDA |
| | ADMINISTRIVE CODE, STATUTES AND FPL REGULATORY |
| | STANDARDS |
| | PROVIDE PANEL DIRECTORY PER 408.4 |
| | |
| | THIS PLAN IS FOR A CHANGE OF OCCUPANCY FOR THIS UNIT |
| | AND WILL REPRESENT THE RECORD DRAWING IN THE FILE |
| | MOVING FORWARD. THE CODE IS THE MINIMUM STANDARD THAT |
| | MUST BE MET AND REQUIRES COMPLIANCE. ADDITIONALLY, |
| | NOTES AND SPECIFICATIONS FOUND ON THE PLAN BY THE |
| | DESIGN PROFESSION NEED TO BE COMPLIED WITH OR |
| | ELIMINATED FROM THE RECORD DRAWING, INCLUDING PERMITTED |
| | WIRING METHODS, COLOR CODING AND ALL OTHER |
| | SPECIFICATIONS SHOWN OR CALLED OUT. IT IS NOT BELIEVED |
| | THE CURRENT WIRING METHODS, INCLUDING THE USE OF TYPE |
| | NM CABLE MEET THE SPECIFICATION CALLED OUT BY THE |
| | DESIGN PROFESSIONAL. |
