City of West Palm Beach eGovPlus

Plan Review Details - Permit 09020021

Plan Review Stops For Permit 09020021

Review Stop	G			GAS REVIEW
Rev No	3	Status	P	Date	2009-03-06			Cont ID
Sent By	kstevens			Date	2009-03-06	Time	17:53	Rev Time	0.00
Received By	kstevens			Date	2009-03-06	Time	17:53	Sent To

Notes

***NONE***

Review Stop	G			GAS REVIEW
Rev No	2	Status	F	Date	2009-02-23			Cont ID
Sent By	kstevens			Date	2009-02-23	Time	11:33	Rev Time	0.00
Received By	kstevens			Date	2009-02-23	Time	11:33	Sent To

Notes

2009-02-23 11:46:49	DENIED
	REFERENCE:
	FBC-2004 FUEL GAS

	****FROM PREVIOUS REVIEW:

	A. THE FOLLOWING INFORMATION IS REQUIRED FOR PERMIT:

	1. SUBMIT AN ISOMETRIC DRAWING THAT
	CLEARLY SHOWS ALL CUT SECTIONS OF PIPE
	AND CORRESPONDING LENGTHS PER FBC-2004
	FUEL GAS CODE. -- PIPING IS DRAWN ON THE FLAT AND IT
	CAN NOT BE DETERMINED HOW THE PIPING FROM THE BBQ IS
	BEING INSTALLED. -- SHOW THE LENGTH OF ALL PIPE
	SECTIONS.
	****NO WRITTEN RESPONSE, COMMENT NOT ADDRESSED. THE
	DRAWING IS NOT IN ISOMETRIC FORM. (SEE EXAMPLE OF
	ISOMETRIC ATTACHED). AS DRAWN IT IS UNCLEAR IF PIPE
	SECTIONS ARE HORIZONTAL OR VERTICAL. PLANS ARE REQUIRED
	TO BE IN ISOMETRIC FORM. THE LENGTH OF PIPE PRIOR TO
	THE RISER FOR THE BBQ & FIREPLACE IS NOT INDICATED AS
	WELL AS THE LAST SECTION OF PIPE TO THE FIREPLACE.

	2. OK

	5. SHOW THE DISTANCE FROM THE POINT OF
	DELIVERY, (METER), TO THE MOST REMOTE
	OUTLET IN THE BUILDING AND/OR SYSTEM PER
	FBC-2004 FUEL GAS CODE APPENDIX A - USE
	OF CAPACITY TABLES A.3.1(4).
	****IT IS NOT CLEAR IF THE SECTION OF PIPE AFTER THE
	170 FOOT SECTION IS INSIDE THE HOUSE OR OUTSIDE. NO
	LENGHT IS INDICATED.

	******NEW COMMENT******

	1B. A UNION IS REQUIRED DOWNSTREAM OF THE SHUT OFF
	VALVES FOR THE REGULATOR TO THE POOL HEATERS AND FOR
	THE REGULATOR TO THE LAST BBQ/FIREPLACE. SECTIONS
	406.7.1 & 410.2(4). PLEASE INDICATE ON ISOMETRIC.

	WHEN RESUBMITTING PLANS PLEASE INDICATE
	THE REVISION & REMOVE & REPLACE ANY
	PAGES AS NECESSARY. A TRANSMITTAL LETTER
	LISTING THE ORIGINAL REVIEW COMMENT NUMBER,
	WITH A DESCRIPTION OF THE REVISION MADE,
	IDENTIFYING THE SHEET OR SPECIFICATION
	PAGE WHERE THE CHANGES CAN BE FOUND
	WILL HELP TO EXPEDITE YOUR PERMIT. REMOVE
	ALL VOID SHEETS FROM ALL PLANS AND PLACE
	ONE SET OF THEM LOOSELY ON TOP OF THE
	COLLATED PLANS TO BE REVIEWED.
	THANK YOU FOR YOUR ANTICIPATED COOPERATION.

	REVIEW BY KEN STEVENS
	(561) 805-6721
	FAX (561) 805-6731
	E-MAIL [email protected]

Review Stop	G			GAS REVIEW
Rev No	1	Status	F	Date	2009-02-04			Cont ID
Sent By	kstevens			Date	2009-02-04	Time	15:36	Rev Time	0.00
Received By	kstevens			Date	2009-02-04	Time	15:36	Sent To

Notes

2009-02-04 15:45:49	DENIED
	REFERENCE:
	FBC-2004 FUEL GAS

	A. THE FOLLOWING INFORMATION IS REQUIRED FOR PERMIT:

	1. SUBMIT AN ISOMETRIC DRAWING THAT
	CLEARLY SHOWS ALL CUT SECTIONS OF PIPE
	AND CORRESPONDING LENGTHS PER FBC-2004
	FUEL GAS CODE. -- PIPING IS DRAWN ON THE FLAT AND IT
	CAN NOT BE DETERMINED HOW THE PIPING FROM THE BBQ IS
	BEING INSTALLED. -- SHOW THE LENGTH OF ALL PIPE
	SECTIONS.

	2. BTU LOAD OF EACH APPLIANCE AND THE
	TOTAL BTU LOAD ON THE SYSTEM. REFER TO
	THE FBC-2004 FUEL GAS CODE SECS. 401.8
	THRU 402.6.1 AND TABLES 402.4(1) THRU
	402.4(33).

	5. SHOW THE DISTANCE FROM THE POINT OF
	DELIVERY, (METER), TO THE MOST REMOTE
	OUTLET IN THE BUILDING AND/OR SYSTEM PER
	FBC-2004 FUEL GAS CODE APPENDIX A - USE
	OF CAPACITY TABLES A.3.1(4).

	WHEN RESUBMITTING PLANS PLEASE INDICATE
	THE REVISION & REMOVE & REPLACE ANY
	PAGES AS NECESSARY. A TRANSMITTAL LETTER
	LISTING THE ORIGINAL REVIEW COMMENT NUMBER,
	WITH A DESCRIPTION OF THE REVISION MADE,
	IDENTIFYING THE SHEET OR SPECIFICATION
	PAGE WHERE THE CHANGES CAN BE FOUND
	WILL HELP TO EXPEDITE YOUR PERMIT. REMOVE
	ALL VOID SHEETS FROM ALL PLANS AND PLACE
	ONE SET OF THEM LOOSELY ON TOP OF THE
	COLLATED PLANS TO BE REVIEWED.
	THANK YOU FOR YOUR ANTICIPATED COOPERATION.

	REVIEW BY KEN STEVENS
	(561) 805-6721
	FAX (561) 805-6731
	E-MAIL [email protected]