| 2007-04-17 14:44:23 | ****CORRECTIONS**** |
| | |
| | SAMANTHA HILL, BUILDING PLANS EXAMINER |
| | 561-805-6724 [email protected] |
| | |
| | FBCFLORIDA BUILDING CODE 2004 |
| | FBC EBFLORIDA BUILDING CODE 2004 |
| | EXISTING BUILDING CODE |
| | FBC*CITY OF WEST PALM BEACH |
| | AMENDMENTS TO THE FBC2004 |
| | |
| | ROOFING PERMIT; ONLY CHECKED ITEMS APPLY |
| | |
| | ____1.)A NOTICE OF COMMENCEMENT MUST BE FILED WITH |
| | THE CLERK OF COURTS PRIOR TO PERMIT PICKUP, FS713.13. |
| | |
| | _XX_2.)CONTRACTOR IS TO PROVIDE THE FOLLOWING |
| | INFORMATION ON THE APPLICATION, SEE ATTACHED POLICY: |
| | |
| | AREA OF EACH ROOF TYPE |
| | REVISE APPLICATION TO INCLUDE FLAT DECK |
| | |
| | _XX_3.)FLORIDA STATE OR LOCAL PRODUCT APPROVAL |
| | REQUIRED IN ADDITION TO THE EVALUATION REPORT |
| | SUBMITTED, FAC9B72.WWW.FLORIDABUILDING.ORG |
| | |
| | _XX_4.)FOR THE FLAT DECK, SELECT THE APPROVED |
| | ASSEMBLY YOU ARE USING.ALSO INDICATE WHICH FASTENER |
| | YOU ARE USING IF THE OPTIONS HAVE DIFFERENT PRESSURE |
| | LIMITATIONS. |
| | |
| | _XX_5.)FOR THE FLAT DECK, SPECIFY THE ENHANCED |
| | FASTENING FOR CORNER AND PERIMETER ZONES. |
| | |
| | ____ 6.)ON THE TILE PRODUCT APPROVAL, INDICATE WHICH |
| | METHOD OF ATTACHMENT YOU ARE USING. |
| | |
| | _XX_ 7.)DOCUMENTS PREPARED BY AN ENGINEER AND |
| | SUBMITTED ARE TO BE SIGNED, SEALED DATED ORIGINALS |
| | FS471. |
| | |
| | _XX_ 8.)PRODUCT APPROVALS ARE TO BE REVIEWED BY |
| | DESIGNER OF RECORD, FBC*106.3.3. |
| | |
| | _XX_ 9.)THE ENGINEERING REFERS TO TAMKO, PRODUCT |
| | APPROVAL SUBMITTED IS POLYGLASS. |
| | |
| | _XX_ 10.)THE ENGINEERING DOES NOT REFER TO A JOB |
| | ADDRESS.HAS THIS ENGINEERING BEEN ALTERED OR DID THE |
| | ENGINEER PREPARE THIS DOCUMENT WITH INSUFFICIENT |
| | INFORMATION? |
| | |
| | |
| | |
| | |
| | |
