City of West Palm Beach eGovPlus

Plan Review Details - Permit 07020357

Plan Review Stops For Permit 07020357

Notes

2007-02-15 17:41:00	DENIED BY BUILDING

	1) THE MAXIMUM DESIGN PRESSURE FOR THE SYSTEM ON PAGE
	38 IS 60 PSF, WHICH IS TOO LOW FOR THE CORNERS WHICH
	REQUIRE 89 PSF. THE LIMITATION NUMBER 7 ON PAGE 40 OF
	THE PRODUCT APPROVAL ALLOWS ENHANCED FASTENING TO
	INCREASE THE PRESSURE. HOWEVER, TO DO THIS THE
	LIMITATION REQUIRES THAT RAS 117 CALCULATIONS MUST BE
	DONE BY AN ARCHITECT, ENGINEER OR REGISTERED ROOFING
	CONSULTANT AS STATED IN THE FIRST REVIEW. SUBMIT THE
	SIGNED AND SEALED RAS 117 CALCULATIONS AS REQUIRED BY
	THE PRODUCT APPROVAL.

	2) THE VALUE OF THE JOB IS BASED ON COSTS FROM ICC OR
	MARSHALLS AND SWIFT ESTIMATING GUIDE. IT DOES NOT
	MATTER WHO THE JOB IS FOR. THE VALUE HAS BEEN ADJUSTED
	ACCORDINGLY.

	ROBERT MCDOUGAL
	BLDG. PLAN REVIEW
	(561)805-6714

Notes

2007-02-14 07:00:50	DENIED BY BUILDING

	1) THE SYSTEM THAT WAS SELECTED ON PAGE 5 OF THE
	CERTAINTEED MODIFIED ROOFING NOA HAS A MAXIMUM DESIGN
	PRESSURE OF -45 PSF WHICH IS TOO LOW FOR THE PERIMETER
	AND CORNER AREAS. THE PERIMETER REQUIRES -59.2 PSF AND
	CORNERS REQUIRE -89 PSF. THE SELECTED SYSTEM ALSO HAS
	LIMITATION NUMBER 9, WHICH DOES NOT ALLOW THE DESIGN
	PRESSURES TO BE INCREASED BY ENHANCED FASTENING. SEE
	LIMITATIONS ON PAGE 40.
	NOTE: OTHER SYSTEMS DO ALLOW FOR INCREASED DESIGN
	PRESSURES BY ENHANCED FASTENING (SEE LIMITATION NUMBER
	7). HOWEVER, THIS REQUIRES RAS 117 CALCULATIONS THAT
	HAVE BEEN DONE BY AN ARCHITECT, ENGINEER OR REGISTERED
	ROOF CONSULTANT.

	2) THE VALUE OF THE WORK IS TOO LOW. PLEASE CHANGE TO
	ADEQUATE VALUE.

	PLEASE CIRCLE THE APPROPRIATE ITEMS IN INK, RATHER THAN
	HIGHLIGHTING. THE HIGHLIGHTER DOES NOT SHOW UP WHEN
	COPIED FOR RECORD KEEPING.

	ROBERT MCDOUGAL
	BLDG. PLAN REVIEW
	(561)805-6714