| Plan Review Stops For Permit 07011363 |
| Review Stop |
B |
BUILDING (STRUCTURAL) |
| Rev No |
1 |
Status |
P |
Date |
2007-02-05 |
|
|
Cont ID |
|
| Sent By |
kconrad |
Date |
2007-02-05 |
Time |
10:56 |
Rev Time |
0.00 |
| Received By |
kconrad |
Date |
2007-02-05 |
Time |
10:56 |
Sent To |
I |
|
| Notes |
| 2007-02-05 11:05:29 | CONTACTED THE PLASTIC COMPONENTS INC. WITH REFERENCE TO | | | THE ATTACHMENT OF THE "V" CONTROL JOINT TO THE EXISTING | | | CMU WALL. AS PER THEIR RECOMMENDATION, THE PRODUCT | | | #2058 CAN BE ATTACHED TO THE CMU WITH 3/4 NON-CORROSIVE | | | STUB NAILS AT 8" O.C. OR WITH AN APPROVED ADHESIVE AT | | | 8" O.C. I ALSO SPOKE WITHMR. JACK HAWK, THE ARCHITECT | | | WHO SUBMITTED THE STUCCO REPAIR DETAIL, AND HE | | | SUGGESTED THAT HE MAY REQUIRE THE USE OF TAPCONS FOR | | | THE ATTACHMENTOF THIS COMPONENT. IF THIS IS THE CASE, | | | WE WILL REQUIRE A REVISION FOR THE SAME. |
|
|
|
