| 2006-09-30 00:00:00 | |
| | |
| | DENIED |
| | |
| | 1) CIY OF WEST PALM BEACH REQUIRES 2 |
| | COPIES OF THE FLORIDA STATE PRODUCT |
| | APPROVAL COVER SHEETS AND THE ASSOCIATED |
| | DRAWINGS, EVALUATION REPORTS OR |
| | MIAMI-DADE NOA THAT WAS USED FOR THE |
| | STATE APPROVAL. |
| | |
| | 2) THE PERMIT APPLICATION SHALL INCLUDE |
| | TWO COPIES OF EACH PRODUCT APPROVAL THAT |
| | IS RELEVANT PER 9B-72. THESE SHOULD |
| | INCLUDE THE FLORIDA STATE APPROVAL COVER |
| | PAGES, AND THE PRODUCT NOA THAT LISTS |
| | THE SYSTEM COMPONENTS/ FASTENER LIST |
| | PAGES, THE PAGES WITH THE CHOSEN |
| | ASSEMBLY/ SYSTEM TO BE USED AND THE |
| | GENERAL LIMITATIONS PAGE. ALL CAN BE |
| | FOUND ON WWW.FLORIDABUILDING.ORG |
| | |
| | *****PLEASE NOTE THAT MATERIALS PAGES |
| | ARE MISSING FROM THE PRODUCT |
| | APPROVALS***** |
| | |
| | 3) LIMITATION #7 ON PAGE 20 OF THE NOA |
| | FOR THE MODIFIED BITUMEN SYSTEM REQUIRES |
| | THAT THE ENHANCED FASTENING FOR THE |
| | PERIMETER (ZONE 2) AND THE CORNERS (ZONE |
| | 3) BE PREPARED,SIGNED AND SEALED BY AN |
| | ARCHITECT, ENGINEER OR REGISTERED |
| | ROOFING CONSULTANT |
| | |
| | 4) PROVIDE THE REVISED NOA THAT IS |
| | ATTACHED BY PDF FILE TO THE FLORIDA |
| | STATE PRODUCT APPROVAL FL# 183-R1 |
| | (NOA# 04-0820.01) FOR THE SHINGLES |
| | |
| | ADRIAN MORSE |
| | BLDG PLAN REVIEW |
| | 561-805-6716 |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
