| 2006-08-09 00:00:00 | |
| | |
| | DENIED |
| | |
| | 1) A DESIGN PROFESSIONAL THAT IS |
| | REGISTERED TO PRACTICE UNDER CHAPTER 481 |
| | OR 471 OF THE FLORIDA STATUTES SHALL |
| | AFFIX THEIR OFFICIAL RAISED SEAL, |
| | SIGNATURE AND DATE TO SAID DRAWINGS AND |
| | SPECIFICATIONS PER 106.1 FBC 2004 |
| | |
| | 2) THE PERMIT APPLICATION SHALL INCLUDE |
| | TWO COPIES OF EACH PRODUCT APPROVAL THAT |
| | IS RELEVANT PER 9B-72. THESE SHOULD |
| | INCLUDE THE FLORIDA STATE APPROVAL COVER |
| | PAGES, AND THE PRODUCT NOA THAT LISTS |
| | THE SYSTEM COMPONENTS/ FASTENER LIST |
| | PAGES, THE PAGES WITH THE CHOSEN |
| | ASSEMBLY/ SYSTEM TO BE USED AND THE |
| | GENERAL LIMITATIONS PAGE. ALL CAN BE |
| | FOUND ON WWW.FLORIDABUILDING.ORG |
| | ******NEEDS PRODUCT APPROVALS FOR ROOF |
| | COVERING AND WOOD CONNECTORS****** |
| | |
| | 3) THOSE PRODUCTS WHICH ARE REGULATED BY |
| | DCA RULE 9B-72 SHALL BE REVIEWED AND |
| | APPROVED IN WRITING BY THE DESIGNER OF |
| | RECORD PRIOR TO SUBMITTAL FOR |
| | JURISDICTIONAL APPROVAL PER 106.3.3 FBC* |
| | |
| | 4) SUBMIT 2 COPIES OF ENGINEERED TRUSS |
| | DRAWINGS THAT COMPLY WITH R802.10.1 FBC |
| | WITH PERMIT APPLICATION OR BEFORE |
| | INSTALLATION THAT HAVE BEEN REVIEWED AND |
| | APPROVED BY THE DESIGNER OF RECORD |
| | |
| | 5) WHEN RESUBMITTING SEALED ENGINEERING |
| | REMOVE ANY WORK THAT IS NOT IN SCOPE OF |
| | WORK FOR THIS PERMIT (WINDOW DETAIL) |
| | |
| | 6) A RECORDED COPY OF THE NOTICE OF |
| | COMMENCEMENT IS REQUIRED PRIOR TO |
| | A PERMIT BEING ISSUED |
| | |
| | BLDG PLAN REVIEW |
| | ADRIAN MORSE |
| | 561-805-6716 |
