City of West Palm Beach eGovPlus

Plan Review Details - Permit 06070415

Plan Review Stops For Permit 06070415

Review Stop	B			BUILDING (STRUCTURAL)
Rev No	2	Status	P	Date	2006-11-13			Cont ID
Sent By	jwitmer			Date	2006-11-13	Time	15:59	Rev Time	0.77
Received By	jwitmer			Date	2006-11-13	Time	15:59	Sent To

Notes

***NONE***

Review Stop	B			BUILDING (STRUCTURAL)
Rev No	1	Status	F	Date	2006-08-25			Cont ID
Sent By	jwitmer			Date	2006-08-25	Time	14:07	Rev Time	1.11
Received By	jwitmer			Date	2006-08-10	Time	08:41	Sent To

Notes

2006-08-10 00:00:00	BUILDING PLAN REVIEW
	PERMIT: 06070415
	ADD: 2140 PALM BCH LAKES BLVD.
	CONT: PERSONALIZED A/C
	TEL: (561) 239-1340
	FL BLD CODE= 2004 FLORIDA BUILDING CODE
	* WEST PALM BEACH AMENDMENTS

	1ST REVIEW
	ACTION: DENIED
	1)--- VERY IMPORTANT STATEMENT ---
	PLEASE DO NOT IGNORE!
	WHEN RESUBMITTING PLANS PLEASE INDICATE
	THE REVISION & REMOVE & REPLACE ANY
	PAGES AS NECESSARY. A TRANSMITTAL LETTER
	LISTING THE ORIGINAL REVIEW COMMENT NUM-
	BER, WITH A DESCRIPTION OF THE REVISION
	MADE, IDENTIFYING THE SHEET OR SPECIFICA
	TION PAGE WHERE THE CHANGES CAN BE FOUND
	WILL HELP TO EXPEDITE YOUR PERMIT. THANK
	YOU FOR YOUR ANTICIPATED COOPERATION.

	2) ENGINEERING SHEET A-1 BY HILLMAN
	ENGINEERING IS A COPY WITH THE WRONG
	ADDRESS INTHE TITLE BLOCK.
	61G15-23.002(2)FL. ADMIN. CODE. PLANS
	SIGNED & SEALED BY A PROFESSIONAL
	ENGINEER SHALL INCLUDE EITHER THE NAME,
	ADDRESS AND LICENSE NUMBER OF THE
	ENGINEER OR, THE NAME AND LICENSE NUMBER
	OF THE ENGINEER AND THE NAME, ADDRESS
	AND CERTIFICATE OF AUTHORIZATION NUMBER
	OF THE ENGINEERING BUSINESS THROUGH
	WHICH THE ENGINEER IS PRACTICING
	(471.025 F.S. AND 471.023 F.S.).

	3) HILLMAN ENGINEERING IS MISSING THEIR
	CERTIFICATE OS AUTHORIZATION:
	61G15-23.002 P. E.- CERTIFICATE OF
	AUTHORIZATION.IF PRACTICING THROUGH A
	DULY AUTHORIZED ENGINEERING BUSINESS,
	ENGINEERS SHALL LEGIBLY INDICATE THEIR
	NAME AND LICENSE NUMBER, AS WELL AS,
	THE NAME, ADDRESS, AND CERTIFICATE OF
	AUTHORIZATION NUMBER OF THE ENGINEERING
	BUSINESS ON EACH SHEET.

	4) HILLMAN ENGINEERING PLANS ARE NOT
	SIGNED NOR SEALED, ORIGINALS, BUT
	COPIED.
	PLANS, SPECIFICATIONS, REPORTS OR
	OTHER DOCUMENTS PREPARED BY THE DESIGN
	PROFESSIONAL AND BEING FILED FOR PUBLIC
	RECORD SHALL HAVE THE SIGNATURE AND
	SEAL OF THE DESIGN PROFESSIONAL AFFIXED
	TO THE DOCUMENT.
	FL STATE STAT: 61G15-23.002 ENGINEERS
	FL ATATE STAT: 61G16.003 ARCHITECTS

	5) PROVIDE ADDITIONAL INFORMATION AS TO
	PREFABRICATED PAD. PROVIDE WEIGHT PER
	SQUARE FOOT.
	1609.1.3 ANCHORAGE AGAINST OVERTURNING,
	UPLIFT AND SLIDING.
	STRUCTURAL MEMBERS AND SYSTEMS AND
	COMPONENTS AND CLADDING IN A BUILDING OR
	STRUCTURE SHALL BE ANCHORED TO RESIST
	WIND-INDUCED OVERTURNING, UPLIFT AND
	SLIDING AND TO PROVIDE CONTINUOUS LOAD
	PATHS FOR THESE FORCES TO THE
	FOUNDATION. WHERE A PORTION OF THE
	RESISTANCE TO THESE FORCES IS PROVIDED
	BY DEAD LOAD, THE DEAD LOAD, INCLUDING
	THE WEIGHT OF SOILS AND FOUNDATIONS,
	SHALL BE TAKEN AS THE MINIMUM DEAD LOAD
	LIKELY TO BE IN PLACE DURING A DESIGN
	WIND EVENT. WHERE THE ALTERNATE BASIC
	LOAD COMBINATIONS OF SECTION 1605.3.2
	ARE USED, ONLY TWO-THIRDS OF THE MINIMUM
	DEAD LOAD LIKELY TO BE IN PLACE DURING A
	DESIGN WIND EVENT SHALL BE USED.


	GENERATOR SLAB & ANCHOR REQUIREMENT
	PLEASE PROVIDE SIZE OF GENERATOR(WXL),
	PLUS PROVIDE PLANS WITH THE INFORMATION
	DEPICTING HOLD DOWN BRACKETS, TYPE OF
	FASTENER, AND THE MINIMUM EDGE DISTANCE
	THE DEVICE REQUIRES WITHOUT LOAD
	REDUCTION.
	SECOND, PROVIDE INFORMATION ON THE
	SLAB, THICKNESS, WIDTH AND LENGTH, IF
	WIREMESH, FIBER MESH OR IF STEEL REBAR
	WILL BEUSED.
	THE NEW SLAB AND HOLD DOWN DETAILS:
	104.2.1* ALL INFORMATION, DRAWINGS,
	SPECIFICATIONS AND ACCOMPANYING DATA
	SHALL BEAR THE NAME AND SIGNATURE OF THE
	PERSON RESPONSIBLE FOR THE DESIGN.
	BUILDING PLAN REVIEW
	JIM WITMER
	TEL: (561)805-6715
	FAX: (561)659-8026

Review Stop	E			ELECTRICAL
Rev No	5	Status	P	Date	2007-02-21			Cont ID
Sent By	dpalmer			Date	2007-02-21	Time	18:17	Rev Time	0.00
Received By	dpalmer			Date	2007-02-21	Time	18:17	Sent To	PC

Notes

2007-02-21 18:18:15	CHANGED ATS SPECS, MUST USE THE SE RATED UNIT TO MEET
	110.9, 230.76 AND 230.79. THIS WAS REDLINED ON SHEETS.

Review Stop	E			ELECTRICAL
Rev No	4	Status	P	Date	2007-02-12			Cont ID
Sent By	dpalmer			Date	2007-02-12	Time	17:04	Rev Time	0.00
Received By	dpalmer			Date	2007-02-12	Time	15:13	Sent To	PC

Notes

***NONE***

Review Stop	E			ELECTRICAL
Rev No	3	Status	F	Date	2007-01-31			Cont ID
Sent By	dpalmer			Date	2007-01-31	Time	17:31	Rev Time	0.00
Received By	dpalmer			Date	2007-01-31	Time	17:31	Sent To	PC

Notes

2007-01-31 17:32:28	PLANS IN FAILED STATUS WAITING FOR NEW ENGINEERING
	SHEETS TO BE SUBMITTED. CALLED ROBERT, OK FOR NEW
	SHEETS TO COME IN WITHOUT FEE.

Review Stop	E			ELECTRICAL
Rev No	2	Status	F	Date	2006-11-14			Cont ID
Sent By	dpalmer			Date	2006-11-14	Time	12:17	Rev Time	0.00
Received By	dpalmer			Date	2006-11-14	Time	11:08	Sent To

Notes

2006-11-14 12:19:00	*** UNSAT 2ND REVIEW***

	*** PLEASE SEE RISER, PLANS AND EQUIPMENT SUBMITTED HAS
	NOW BEEN COMPLETELY REVISED FROM THE PREVIOUSLY
	REVIEWED WHICH HAS CREATED NEW COMMENTS.

	1) NOTE: PLEASE SUBMIT THE PERMIT APPLICATION BACK WITH
	PLANS. COULD NOT LOCATE THE ORIGINAL PERMIT APPLICATION
	IN PERMIT PLANS AND PACKAGE.
	PLEASE REVISE PERMIT APPLICATION TO INCLUDE THE NEW GEN
	AS NOW SUBMITTED. PLEASE ALSO ADJUST VALUE AS REQUIRED
	BY CODE FOR SCOPE OF WORK. THIS VALUE SHALL BE BASED ON
	TABLES AS SET FORTH AND ADOPTED INTO THE CODE FOR FAIR
	MARKET VALUE. FBC 108.3
	105.1, 106.1.2
	FBC ADMINISTRATIVE SECTION AS ADOPTED BY THE CITY OF
	WEST PALM BEACH.

	2) NOTE: PLEASE SUBMIT TWO REVISED SITE/SURVEY PLANS
	WHICH INDICATE THE NEW PROPOSED 40KW UNIT. PLEASE
	INDICATE ALL OF THE UPDATED DIMENSIONS AND SET-BACKS.
	THESE WILL BE SENT TO ZONING FOR REVIEW AND STAMPING AT
	THAT TIME. PLEASE SEE THE SITE/SURVEY ORIGINAL
	SUBMITTED AND STAMPED BY ZONING WAS VOIDED AS IT IS NOT
	LONGER VALID BASED ON THE CHANGES MADE TO PLANS.

	3) NOTE: PLEASE SUBMIT THE OVER-VIEW OF SAID LOCATION
	OF ALL EQUIPMENT. PLEASE BE SURE THE MANUFACTURE
	SPECIFICATION DATA SUBMITTED INDICATES THE MINIMUM
	REQUIRED DISTANCES AROUND EQUIPMENT AS REQUIRED BY THE
	MANUFACTURE.
	90.7, 110.3

	4) NOTE: PLEASE SEE SERVICE IS NOW SHOWING 400A OCP FOR
	THE SERVICE ENTRANCE CONDUCTORS WHICH SEEMED TO BE FOR
	A MUCH SMALLER SERVICE.
	PLEASE SEE PREVIOUS PLANS INDICATED A 200A SERVICE WITH
	2/0'S WHICH WERE TOO SMALL AS THE TABLE IN 310.15B6 CAN
	NOT BE USED. THIS IS NOT A DWELLING.
	PLEASE SEE 240.4, 310.16 AS THE OCP PROVIDED IN THE
	SERVICE SHALL LIMIT THE LOAD AND PROTECT THE SERVICE
	ENTRANCE CONDUCTORS.
	PLEASE KNOW, A MAIN AHEAD OF AN ATS IS OK, AND A SE
	RATED ATS IS NOT REQUIRED. IN THE SCENARIO AS SHOWN THE
	OCP IS NOT PERMITTED AT 400A?S ON 1/0'S.
	PLEASE ALSO SEE RISER SHOWS ONLY 2- HOT-PHASE
	CONDUCTORS AND ONE HIGH LEG FROM THE SE RATED ATS TO
	THE GUTTER INSIDE.
	MISSING THE NEUTRAL, MISSING THE EQUIPMENT GROUNDING
	CONDUCTOR (AFTER THE FIRST MEANS OF DISCONNECT). 250.6,
	250.24, 250.110, 250.122 ETC.
	PLEASE SEE EVEN THE HIGH-LEG DECREASES IN SIZE TO#3
	FROM THE #2 IN RISER.
	PLEASE INDICATE THE OCP IN ALL EXISTING PANELS AND
	EQUIPMENT.
	PLEASE ALSO SEE AS RISER HAS NOW BEEN COMPLETELY
	CHANGED FOR 400A OCP FOR SERVICE; PLEASE SEE 240.21 FOR
	TAPPED CONDUCTORS PERMITTED ETC.
	PLEASE SEE IF THE SEC'S DO ACTUALLY INCREASE, PLEASE BE
	SURE TO SEE 250.66 FOR THE GEC.
	PLEASE KNOW THE GENERATOR MUST CONTAIN A "READILY
	ACCESSIBLE" DISCONNECTING MEANS LOCATED WITHIN SIGHT.
	(50FT) THE DISCONNECTING MEANS MAY NOT EXPOSE ANY
	PERSON TO LIVE PARTS.
	PLEASE VERIFY THIS ON THE EQUIPMENT BEING PURCHASED.
	110.27, 225.31-225.39, 702.8 ETC

	5) NOTE: PLEASE SEE SPECS FROM MANUFACTURE ARE HIGH
	LIGHTED AS BOTH 3-POLE AND 4-POLE, WHICH ONE WILL THIS
	BE? PLEASE VERIFY WITH THE MANUFACTURE AS MANY
	GENERATOR MANUFACTURE SHIP THEIR GENERATORS WIRED FOR
	SEPARATELY DERIVED SYSTEMS.
	IF THIS IS GOING TO BE A SD GEN, PLEASE BE SURE TO
	ADJUST GROUNDING OF THE GEN AND THE NEED FOR A 4-POLE
	ATS.

	** PLEASE KNOW, THE RAISED SEAL OVER THE SLAB
	ENGINEERING SHEETS IS IN FACT A RAISED SEAL OVER A
	COLOR PHOTO-COPIED SIGNATURE. SIGNATURE MUST BE
	ORIGINAL WHEN REQUIRED.
	THIS IS IN VIOLATION OF FLORIDA STATUTES 471.025 AND
	FLORIDA ADMINISTRATIVE CODE 61G15-23.002.
	THIS IS ONLY NOTED BY THE ELECTRICAL REVIEW AT THIS
	TIME

	* IMPORTANT
	ONCE ALL REVIEWS ARE DONE AND PLANS ARE
	PICKED UP FOR CORRECTIONS, PLEASE BE
	SURE TO COMPLETELY REMOVE ALL OLD/VOIDED
	SHEETS AND ONLY INSERT NEW REVISED
	SHEETS INTO TWO COMPLETE SETS FOR REVIEW
	AND STAMPING. DO NOT LEAVE ANY
	OLD/VOIDED SHEETS IN SETS.
	PLEASE KNOW ONLY ONE SET OF THE
	OLD/VOIDED SHEETS SHOULD BE SUBMITTED
	FOR REFERENCE.
	THIS WILL HELP IN THE REVIEW PROCESS AND
	AVOID ANY DELAYS.

	PLEASE SUBMIT THE ABOVE INFORMATION FOR REVIEW. IF
	THERE ARE ANY QUESTIONS, COMMENTSOR IF ANY OF THE
	NOTES TYPEDWHICH ARE UNCLEAR IN ANY WAY, PLEASE DO
	NOT HESITATEIN CONTACTING THIS REVIEWER.




	DEWEY PALMER
	ELECTRICAL PLAN REVIEW
	CONSTRUCTION SERVICES DEPT.
	CITY OF WEST PALM BEACH
	561-805-6717
	[email protected]

Review Stop	E			ELECTRICAL
Rev No	1	Status	F	Date	2006-07-26			Cont ID
Sent By	dpalmer			Date	2006-07-26	Time	19:07	Rev Time	0.00
Received By	dpalmer			Date	2006-07-26	Time	18:47	Sent To

Notes

2006-07-26 00:00:00	UNSAT

	1) NOTE: PLEASE SUBMIT AIC RATINGS FOR
	ALL NEW SERVICE EQUIPMENT BEING
	INSTALLED.
	110.9,FBC 106.1.2

	2) NOTE: PLEASE PROVIDE AN OVERVIEW OF
	THE EQUIPMENT AND LOCATIONS. NEED TO
	VERIFY GROUPING OF DISCONNECTS ETC.
	PLEASE VERIFY IF THE NEW 125A SUB PANEL
	CONTAINS AND MCB AND IS GROUPED WITH THE
	OTHER NEW 200A DISCONNECT.
	225.31-225.39, 230.72

	3) NOTE: PLEASE PROVIDE THE MINIMUM
	DISTANCES FROM BUILDING IN WHICH THE
	GENERATOR IS BEING INSTALLED. PLEASE
	KNOW AS OF THE DATED INFORMATION
	OBTAINED BY THIS OFFICE ALL LIQUID
	COOLED UNITS ARE RECOMMENED TO CONTAIN A
	5' MIN CLEARENCE AROUND UNIT. PLEASE SEE
	MECH COMMENTS FOR CLEARENCES FROM
	OPENINGS TO BUIDLING.
	PLEASE KNOW, IF MANUFACTURES SPEC/CUT
	SHEETS INDICATE A LESSER MIN CLEARENCE
	PLEASE SUBMIT AND HIGHLIGHT.
	110.3,90.7

	4) NOTE: PLEASE SUBMIT MANUFACTURES
	SPEC/CUT SHEETS FOR THE ATS FOR REVIEW.
	110.3,90.7

	5) NOTE: PLEASE SEE THAT LOAD
	CALCULATIONS CONTAIN THE PRINTED NAME
	AND SIGNATURE OF THE PERSON RESPONSIBLE
	FOR SAID PLANS.

	PLEASE SUBMIT THE ABOVE INFORMATION FOR
	REVIEW. IF THERE ARE ANY QUESTIONS,
	PLEASE DO NOT HESITATE TO CALL.

	DEWEY PALMER
	ELECTRICAL PLAN REVIEW
	CITY OF WEST PALM BEACH
	CONSTUCTION SERVICES DEPT.
	561-805-6717
	[email protected]

Review Stop	FIRE			FIRE DEPARTMENT
Rev No	2	Status	P	Date	2006-12-29			Cont ID
Sent By	mawillia			Date	2006-12-29	Time	15:11	Rev Time	0.00
Received By	mawillia			Date	2006-12-29	Time	15:11	Sent To

Notes

2006-12-29 15:13:24	***APPROVED***



	TO BE STAMPED AND SIGNED WHEN ALL PLAN REVIEWS HAVE
	BEEN SATISFIED

Review Stop	FIRE			FIRE DEPARTMENT
Rev No	1	Status	P	Date	2006-08-18			Cont ID
Sent By	mwennerg			Date	2006-08-18	Time	14:17	Rev Time	0.00
Received By	mwennerg			Date	2006-08-18	Time	14:17	Sent To

Notes

2006-08-18 00:00:00	*PROVISO*

	1) PLEASE SHOW DIMENSIONS CLEARLY IN
	REGARDS TO BUILDING OPENINGS. IF NO
	OTHER CHANGE TO FIRST FIRE REVIEW, PLANS
	WILL BE STAMPED WHEN RESUBMITTED.

	2) WORK TO COMPLY WITH NFPA 101, 2003
	EDITION AND NFPA 110, 2002 EDITION.
	PLEASE INDICATE ON PLANS.


	MIKE WENNERGREN, CAPTAIN/WPBFR
	FIRE PLAN REVIEW (561) 805-6722

Review Stop	G			GAS REVIEW
Rev No	2	Status	P	Date	2007-01-03			Cont ID
Sent By	kstevens			Date	2007-01-03	Time	15:41	Rev Time	0.00
Received By	kstevens			Date	2007-01-03	Time	15:41	Sent To

Notes

***NONE***

Review Stop	G			GAS REVIEW
Rev No	1	Status	P	Date	2006-08-09			Cont ID
Sent By	kstevens			Date	2006-08-09	Time	18:17	Rev Time	0.00
Received By	kstevens			Date	2006-08-09	Time	18:17	Sent To

Notes

***NONE***

Review Stop	I			INCOMING/PROCESSING
Rev No	6	Status	N	Date	2007-02-15			Cont ID
Sent By	adarroug			Date	2007-02-15	Time	13:46	Rev Time	0.00
Received By	adarroug			Date	2007-02-15	Time	13:46	Sent To	E

Notes

2007-02-15 13:46:50

TO "DPALMER" DESK/REV

Review Stop	I			INCOMING/PROCESSING
Rev No	5	Status	N	Date	2007-02-09			Cont ID
Sent By	adarroug			Date	2007-02-09	Time	08:43	Rev Time	0.00
Received By	adarroug			Date	2007-02-09	Time	08:43	Sent To	E

Notes

2007-02-09 08:43:53

TO "DPALMER" DESK/SUBMITTAL

Review Stop	I			INCOMING/PROCESSING
Rev No	4	Status	N	Date	2007-01-30			Cont ID
Sent By	adarroug			Date	2007-01-30	Time	16:39	Rev Time	0.00
Received By	adarroug			Date	2007-01-30	Time	16:39	Sent To	E

Notes

2007-01-30 16:39:24

TO "DPALMER" DESK/RESUB

Review Stop	I			INCOMING/PROCESSING
Rev No	3	Status	N	Date	2006-11-07			Cont ID
Sent By	adarroug			Date	2006-11-07	Time	08:50	Rev Time	0.00
Received By	adarroug			Date	2006-11-07	Time	08:50	Sent To

Notes

2006-11-08 13:05:43	TO "COMM" BD#9
2006-11-07 08:51:16	WAITING FOR "COMM" BD--NEW SHEETS FOR ALL TRADES

Review Stop	I			INCOMING/PROCESSING
Rev No	2	Status	N	Date	2006-07-18			Cont ID
Sent By	adarroug			Date	2006-07-18	Time	11:39	Rev Time	0.00
Received By	adarroug			Date	2006-07-18	Time	11:39	Sent To

Notes

2006-07-26 00:00:00	TO "COMM" BD#50
2006-07-18 00:00:00	WAITING FOR "COMM" BD

Review Stop	I			INCOMING/PROCESSING
Rev No	1	Status	N	Date	2006-08-25			Cont ID
Sent By	tgordon			Date	2006-08-25	Time	14:15	Rev Time	0.00
Received By	tgordon			Date	2006-07-10	Time	14:07	Sent To

Notes

2006-07-10 00:00:00

TO "Z" BOX

Review Stop	M			MECHANICAL (A/C)
Rev No	2	Status	P	Date	2006-11-08			Cont ID
Sent By	tgordon			Date	2006-11-08	Time	16:03	Rev Time	0.20
Received By	tgordon			Date	2006-11-08	Time	16:03	Sent To

Notes

***NONE***

Review Stop	M			MECHANICAL (A/C)
Rev No	1	Status	P	Date	2006-08-25			Cont ID
Sent By	tgordon			Date	2006-08-25	Time	14:08	Rev Time	0.20
Received By	tgordon			Date	2006-08-25	Time	14:08	Sent To

Notes

2006-08-25 00:00:00	* PROVISO *
	1) PER 2004 FBC, FUEL GAS - POWERED
	EQUIPMENT - PERMANENTLY INSTALLED
	EQUIPMENT POWERED BY INTERNAL COMBUSTION
	ENGINES SHALL BE INSTALLED IN ACCORDANCE
	WITH MANUFACTURE'S INSTALLATION
	INSTRUCTIONS AND NFPA 37.

	NFPA 37 INSTALLATION & USE OF STATIONARY
	COMBUSTION ENGINES & GAS TURBINES:
	4.1.4ENGINES (GENERATORS) LOCATED
	OUTDOORS SHALL BE MINIMUM OF 5 FT FROM
	OPENINGS IN WALLS & AT LEAST 5 FT FROM
	STRUCTURES HAVING COMBUSTIBLE WALLS.A
	MINIMUM CLEARANCE IS NOT REQUIRED WHEN
	(1) THE ADJACENT WALL HAS A MINIMUM FIRE
	RESISTANCE RATING OF 1 HOUR OR (2) THE
	WEATHERPROOF ENCLOSURE IS CONSTRUCTED OF
	NON-COMBUSTIBLE MATERIALS, AND IT HAS
	BEEN DEMONSTRATED THAT A FIRE WITHIN THE
	ENCLOSURE WILL NOT IGNITE COMBUSTIBLE
	MATERIALS OUTSIDE THE ENCLOSURE.
	INFORMATIVE: A.8.2.3.1EXHAUST SYSTEMS
	SHOULD NOT TERMINATE UNDER STRUCTURES OR
	WHERE THE EXHAUST MIGHT BE DRAWN INTO
	THE VENTILATION INTAKES.

	2004 FMC 804.3.5 #3, WHERE THE
	TERMINATION IS LOCATED BELOW AN ADJACENT
	ROOF STRUCTURE, THE TERMINATION POINT
	SHALL BE LOCATED AT LEAST 3 FT FROM THE
	ROOF STRUCTURE.

	PLEASE NOTE, WHILE ZONING ALLOWS
	MECHANICAL EQUIPMENT TO ENCROACH 4 FT
	INTO THE REQUIRED SETBACK, GENERATORS
	SHALL MAINTAIN THE REQUIRED ABOVE
	MENTIONED CLEARANCES TO THE ADJACENT
	PROPERTY STRUCTURES, I.E. FENCE,
	BUILDING, WINDOWS, DOORS, OR OPENINGS.

	FOLLOW MANUFACTURE'S RECOMMENDED
	CLEARANCES AROUND EQUIPMENT FOR
	SERVICING,AND PROVIDE MANUFACTURE'S
	INSTALLATION INSTRUCTIONS AT THE JOBSITE
	FOR THE FIELD INSPECTOR.
	MECHANICAL PLAN REVIEW BY;
	TOM GORDON (561) 805-6729.

Review Stop	Z			ZONING
Rev No	2	Status	P	Date	2006-11-11			Cont ID
Sent By	mmclean			Date	2006-11-11	Time	14:44	Rev Time	0.00
Received By	mmclean			Date	2006-11-11	Time	14:44	Sent To

Notes

2006-11-11 14:45:16	NEW PLANS - PROVISO:
	PLEASE PROVIDE A LANDSCAPE BUFFER TO THE PROPOSED
	GENERATOR AS TO SCREEN THE VIEW OF GENERATOR.

Review Stop	Z			ZONING
Rev No	1	Status	P	Date	2006-07-16			Cont ID
Sent By	mmclean			Date	2006-07-16	Time	14:04	Rev Time	0.00
Received By	mmclean			Date	2006-07-16	Time	14:04	Sent To	I

Notes

2006-07-16 00:00:00	PROVISO: PLEASE PROVIDE A LANDSCAPE BUFFERTO THE
	PROPOSED GENERATOR AS TO PROVIDE SCREEN FROM VIEW.