| Plan Review Stops For Permit 06040811 |
| Review Stop |
B |
BUILDING (STRUCTURAL) |
| Rev No |
2 |
Status |
P |
Date |
2006-04-24 |
|
|
Cont ID |
|
| Sent By |
amorse |
Date |
2006-04-24 |
Time |
12:20 |
Rev Time |
0.50 |
| Received By |
amorse |
Date |
2006-04-24 |
Time |
12:20 |
Sent To |
PC |
|
| Notes |
|
|
| Review Stop |
B |
BUILDING (STRUCTURAL) |
| Rev No |
1 |
Status |
F |
Date |
2006-04-20 |
|
|
Cont ID |
|
| Sent By |
amorse |
Date |
2006-04-20 |
Time |
06:31 |
Rev Time |
0.75 |
| Received By |
amorse |
Date |
2006-04-20 |
Time |
06:31 |
Sent To |
PC |
|
| Notes |
| 2006-04-20 00:00:00 | | | | | | | DENIED | | | | | | 1) PERMIT APPLICATION STATES THE USE OF | | | RUBERIOD WHICH IS A GAF PRODUCT. ONLY | | | THE STATE COVER SHEET WAS SUPPLIED AND | | | IT IS OUTDATED. POLYGLASS NOA WAS ALSO | | | SUBMITTED FOR MODIFIED ROOFING WHICH | | | PRODUCT ARE YOU USING? | | | | | | 2) PLEASE NOTE ON LAST PAGE OF POLYGLASS | | | NOA, LIMITATION #7 REQUIRES THE ENHANCED | | | FASTENING TO BE CALCULATED BUY AN | | | ENGINEER,ARCHITECT OR REGISTERED ROOFING | | | CONSULTANT | | | | | | 3) WHEN SUBMITTING THE NOA FOR FLAT ROOF | | | PRODUCTS ALWAYS CIRCLE OR MARK THE | | | SYSTEM THAT YOU INTEND TO INSTALL ON THE | | | JOB AS THERE ARE MANY SYSTEMS ADDRESSED | | | IN THE NOA.IF YOU WISH ONLY THE ASEMBLY | | | THAT YOU WILL BE USING NEEDS TO BE | | | PROVIDED. | | | | | | ***EXAMPLE*** | | | POLYGLASS NOA SUBMIT PRODUCT PAGES 1-5, | | | THE SYSTEM THAT YOU WILL INSTALL ON THE | | | JOB, (INSULATED ROOFS PAGES 6-36 NON- | | | INSULATED PAGES 37-43, TILE UNDERLAYMENT | | | PAGE 44) AND THE GENERAL LIMITATION PAGE | | | 45. | | | | | | | | | BLDG PLAN REVIEW | | | ADRIAN MORSE | | | 561-805-6716 | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
|
|
|
