| Plan Review Stops For Permit 06020405 |
| Review Stop |
B |
BUILDING (STRUCTURAL) |
| Rev No |
2 |
Status |
P |
Date |
2006-02-16 |
|
|
Cont ID |
|
| Sent By |
rmcdouga |
Date |
2006-02-16 |
Time |
07:40 |
Rev Time |
0.00 |
| Received By |
rmcdouga |
Date |
2006-02-16 |
Time |
07:21 |
Sent To |
|
|
| Notes |
|
|
| Review Stop |
B |
BUILDING (STRUCTURAL) |
| Rev No |
1 |
Status |
F |
Date |
2006-02-09 |
|
|
Cont ID |
|
| Sent By |
rmcdouga |
Date |
2006-02-09 |
Time |
08:24 |
Rev Time |
0.00 |
| Received By |
rmcdouga |
Date |
2006-02-09 |
Time |
08:24 |
Sent To |
|
|
| Notes |
| 2006-02-09 00:00:00 | DENIED | | | | | | 1) SUBMIT PRODUCT APPROVALS FOR THE TILE | | | UNDERLAYMENT SYSTEM THAT WILL BE | | | INSTALLED. THE DESIGN PRESSURES FOR THE | | | TILE UNDERLAYMENT MUST MEET THE UPLIFT | | | PRESSURES FOR THE STRUCTURE. THE TILE IS | | | BEING ATTACHED TO THE SYSTEM WITH | | | ADHESIVE AND NOT MECHANICALLY FASTENED. | | | | | | 2) INDICATE WHICH ONE OF THE APPROVED | | | ASSEMBLIES WILL BE INSTALLED FROM THE | | | ONES LISTED IN THE NOA FOR THE MODIFIED | | | BITUMEN SYSTEM. | | | | | | 3) CLARIFY THE SYSTEM THAT WILL BE USED | | | UNDER THE TILE AND THE ONE FOR THE FLAT | | | DECK. | | | | | | 4) SUBMIT SBCCI REPORT 9822B FOR THE | | | POLYFOAM, WHICH IS THE ONE LISTED ON THE | | | STATE WEBSITE. | | | | | | 5) ON FUTURE SUBMITTALS SEPARATE THE | | | ITEMS THAT PERTAIN TO EACH COMPONENT | | | INTO THE PROPER GROUPS AND NOT ALL MIXED | | | TOGETHER AS THEY WERE FOR THIS | | | SUBMITTAL. THEY WILL BE REJECTED IN THE | | | FUTURE. | | | ROBERT MCDOUGAL | | | BLDG. PLAN REVIEW | | | (561)805-6714 | | | |
|
|
|
