| 2006-02-08 00:00:00 | DENIED |
| | |
| | INSUFFICIENT INFORMATION FOR A PLAN |
| | REVIEW. |
| | |
| | 1.SHOW ROOF HEIGHT ON APPLICATION. |
| | |
| | 2.SHOW SLOPE OF TILE ROOF ON |
| | APPLICATION. |
| | |
| | 3. SUBMIT TWO COPIES OF STATE APPROVAL |
| | FOR SANTEFE TILE. |
| | |
| | 4.SUBMIT TWO SETS OF PRODUCT APPROVALS |
| | FOR FLAT ROOFING WITH ROOF ASSEMBLY |
| | SELECTED. |
| | |
| | 5.ALL PRODUCT APPROVALS SUBMITTED |
| | SHALL HAVE THE FOLLOWING STATE PRODUCT |
| | APPROVAL ATTACHED. |
| | PRODUCT APPROVALS SUBMITTED WITH |
| | PERMIT APPLICATION AFTER OCTOBER 1, 2003 |
| | ARE REQUIRED TO COMPLY WITH THE FLORIDA |
| | PRODUCT APPROVAL SYSTEM. FOR INFORMATION |
| | PLEASE SEE THE STATE WEBSITE AT |
| | WWW.FLORIDABUILDING.ORG. PRODUCTS WITH |
| | STATEWIDE APPROVAL ARE REQUIRED TO BE |
| | SUBMITTED WITH A COVER SHEET THAT LISTS |
| | THE PRODUCT IDENTITY NUMBER FROM THE |
| | STATE. IF THE PRODUCT DOES NOT HAVE |
| | STATEWIDE APPROVAL, SUBMIT AN APPLICA- |
| | TION FOR LOCAL PRODUCT APPROVAL OR SITE |
| | SPECIFIC FORM PER RULE 9B-72. SEE |
| | ATTACHMENT. WWW.FLORIDABUILDING.ORG |
| | |
| | 6.NEW COMMENT:SUBMIT 2 COPIES OF |
| | PRODUCT APPROVALS FOR POLYGLASS.SEE |
| | LIMITATION NUMBER 2.POLYSTICK P NOT TO |
| | BE USED AS A TILE UNDERLAYMENT.VERIFY |
| | WHAT PRODUCT WILL BE USED. |
| | |
| | ART LANGE |
| | BUILDING PLANS EXAMINER |
| | 805-6672 |
