| 2005-10-17 00:00:00 | DENIED |
| | |
| | 1)A RECORDED COPY OF THE NOTICE OF |
| | COMMENCEMENT MUST BE SUBMITTED BEFORE A |
| | PERMIT CAN BE ISSUED. |
| | |
| | 2) THE ENGINEER'S CALCULATIONS REFERENCE |
| | THE 2001 FBC. THE 2004 FBC IS REQUIRED |
| | TO BE USED FOR ALL PROJECTS SUBMITTED |
| | AFTER OCTOBER 1, 2005. |
| | |
| | 3) PRODUCT APPROVALS SUBMITTED |
| | WITH PERMIT APPLICATION AFTER OCTOBER 1, |
| | 2003 ARE REQUIRED TO COMPLY WITH THE |
| | FLORIDA PRODUCT APPROVAL SYSTEM. FOR |
| | INFORMATION PLEASE SEE THE STATE WEBSITE |
| | AT WWW.FLORIDABUILDING.ORG. PRODUCTS |
| | WITH STATEWIDE APPROVAL ARE REQUIRED TO |
| | BE SUBMITTED WITH A COVER SHEET THAT |
| | LISTS THE PRODUCT IDENTITY NUMBER FROM |
| | THE STATE. IF THE PRODUCT DOES NOT HAVE |
| | STATEWIDE APPROVAL, SUBMIT AN APPLICA- |
| | TION FOR LOCAL PRODUCT APPROVAL OR SITE |
| | SPECIFIC FORM PER RULE 9B-72. SUBMIT |
| | COVERSHEETS WITH FLORIDA PRODUCT |
| | APPROVAL NUMBERS FOR ALL ROOFING |
| | PRODUCTS. ALSO SUBMIT THE CORRESPONDING |
| | PRODUCT EVAULATIONS AS LISTED ON THE |
| | FLORIDA PRODUCT APPROVAL WEBSITE. |
| | |
| | 4) PROVIDE MANUFACTURER'S SPECIFICATIONS |
| | INDICATING THAT THE PRODUCT IS APPROVED |
| | FOR INSTALATION ON AN ARCHED ROOF AS |
| | SHOWN ON THE BUILDING PLANS. SPECIFY HOW |
| | RADIUS WILL BE ACHIEVED ON METAL PANELS. |
| | |
| | 5) ONLY THE ARCHED UPPER ROOF IS |
| | APPLICABLE TO THIS PERMIT. THE OTHER |
| | AREAS INDICATED ON THE DRAWINGS THAT YOU |
| | SUBMITTED ARE SPECIFIED AS METAL AWNINGS |
| | ON THE BUILDING PLANS (PERMIT # |
| | 04111429). SEE ITEM #9 ON A2.1. |
| | PRODUCT APPROVALS AND STRUCTURAL |
| | DETAILS FOR THE AWNINGS ARE REQUIRED TO |
| | BE SUBMITTED UNDER A SEPARATE PERMIT. |
| | |
| | ROBERT MCDOUGAL |
| | BLDG. PLAN REVIEW |
| | (561)805-6714 |
| | |
