|
 |
 |
 |
 |
 |
Plan Review Details - Permit 05091233
| Plan Review Stops For Permit 05091233 |
| Review Stop |
B |
BUILDING (STRUCTURAL) |
| Rev No |
3 |
Status |
P |
Date |
2005-10-20 |
|
|
Cont ID |
|
| Sent By |
shill |
Date |
2005-10-20 |
Time |
14:45 |
Rev Time |
0.00 |
| Received By |
shill |
Date |
2005-10-20 |
Time |
14:45 |
Sent To |
|
|
| Notes |
|
|
| Review Stop |
B |
BUILDING (STRUCTURAL) |
| Rev No |
2 |
Status |
F |
Date |
2005-09-29 |
|
|
Cont ID |
|
| Sent By |
mjacobs |
Date |
2005-09-29 |
Time |
16:23 |
Rev Time |
1.50 |
| Received By |
mjacobs |
Date |
2005-09-29 |
Time |
15:05 |
Sent To |
PC |
|
| Notes |
| 2005-09-29 00:00:00 | 1)THE SPACING FOR THE NAILS OR SCREWS IS | | | 6" O.C. SEE DECK ATTACHMENT IN REPORT. | | | THE SYSTEM LIMITATIONS STATES THAT | | | INCREASED DESIGN PRESSURES AT THE | | | PERIMETER AND CORNERS, SHALL BE DONE BY | | | A FLORIDA REGISTERED PROFESSIONAL | | | ENGINEER,REGISTERED ARCHITEDT,OR | | | REGISTERED ROOF CONSULTANT. ALL | | | DOCUMENTS AND REPORTS PREPARED BY THE | | | REGISTERED SHALL BE SIGNED,DATED AND | | | SEALED BY THAT PERSON. | | | | | | 2) SEE FBC.TABLE 1606.2B FOR THE | | | PRESSURES OF THE ROOF SLOPES. | | | | | | BUILDING PLAN REVIEW | | | MYRON JACOBS | | | TEL: (561)805-6726 | | | FAX: (561)659-8026 | | | [email protected]. |
|
|
| Review Stop |
B |
BUILDING (STRUCTURAL) |
| Rev No |
1 |
Status |
F |
Date |
2005-09-26 |
|
|
Cont ID |
|
| Sent By |
alange |
Date |
2005-09-26 |
Time |
12:43 |
Rev Time |
0.00 |
| Received By |
mjacobs |
Date |
2005-09-29 |
Time |
15:04 |
Sent To |
|
|
| Notes |
| 2005-09-26 00:00:00 | DENIED | | | | | | 1.SUBMIT TWO COPIES OF PRODUCT | | | APPROVALS WITH QUALITY ASSURANCE FROM | | | EXTERIOR RESEARCH AND DESIGN FOR THE | | | CERTAIN TEED UNDERLAYMENT. | | | PRODUCT APPROVALS SUBMITTED WITH | | | PERMIT APPLICATION AFTER OCTOBER 1, 2003 | | | ARE REQUIRED TO COMPLY WITH THE FLORIDA | | | PRODUCT APPROVAL SYSTEM. FOR INFORMATION | | | PLEASE SEE THE STATE WEBSITE AT | | | WWW.FLORIDABUILDING.ORG. PRODUCTS WITH | | | STATEWIDE APPROVAL ARE REQUIRED TO BE | | | SUBMITTED WITH A COVER SHEET THAT LISTS | | | THE PRODUCT IDENTITY NUMBER FROM THE | | | STATE. IF THE PRODUCT DOES NOT HAVE | | | STATEWIDE APPROVAL, SUBMIT AN APPLICA- | | | TION FOR LOCAL PRODUCT APPROVAL OR SITE | | | SPECIFIC FORM PER RULE 9B-72. SEE | | | ATTACHMENT. WWW.FLORIDABUILDING.ORG | | | | | | 2.SELECT THE UNDERLAYMENT APPLICATION | | | THAT WILL BE USED.THERE ARE THREE | | | TYPES AND NOT ALL WILL WORK UNDER METAL | | | ROOFING. | | | | | | ANY QUESTIONS CALL ME. | | | | | | ART LANGE | | | BUILDING PLANS EXAMINER | | | 805-6672 | | | |
|
|
| Review Stop |
I |
INCOMING/PROCESSING |
| Rev No |
1 |
Status |
N |
Date |
2005-09-29 |
|
|
Cont ID |
|
| Sent By |
mjacobs |
Date |
2005-09-29 |
Time |
15:04 |
Rev Time |
0.00 |
| Received By |
mjacobs |
Date |
2005-09-29 |
Time |
15:04 |
Sent To |
|
|
| Notes |
|
|
|
Account Summary | Usage Policy | Privacy Policy
Copyright © 2005 – 2014, SunGard Pentamation, Inc & City of West Palm Beach, FL – All Rights Reserved |
 |
|
