| 2005-09-06 00:00:00 | 1) PLEASE INDICATE THE TYPE OF ROOMS |
| | WHERE THE WINDOWS ARE TO BE FRAMED IN |
| | FOR EGRESS PURPOSES. |
| | |
| | 2) ADDITIONAL INFORMATION IS REQUIRED |
| | FOR THE SCOPE OF WORK. PLEASE INDICATE |
| | WHAT THE DOTTED LINES REPRESENT. IT |
| | SEEMS AS IF THERE WILL BE INTERIOR |
| | DEMOLITION OF A FEW WALLS. PLEASE |
| | CLARIFY AND INDICATE ON THE APPLICATION |
| | FBC.104.2.1 |
| | |
| | 3) ALL PRODUCT APPROVALS SHOULD HAVE A |
| | STATE COVERED SHEET WITH THE FL#. THE |
| | PRODUCT APPROVALS SUBMITTED NEEDS STATE |
| | COVER SHEETS. PLEASE BE SURE THAT ALL |
| | REPORTS ARE UPDATED AND APPROVED. |
| | PRODUCT APPROVALS SUBMITTED WITH PERMIT |
| | APPLICATION AFTER OCTOBER 1, 2003 ARE |
| | REQUIRED TO COMPLY WITH THE FLORIDA |
| | PRODUCT APPROVAL SYSTEM. FOR INFORMATION |
| | PLEASE SEE THE STATE WEBSITE AT |
| | WWW.FLORIDABUILDING.ORG. PRODUCTS WITH |
| | STATEWIDE APPROVAL ARE REQUIRED TO BE |
| | SUBMITTED WITH A COVER SHEET THAT LISTS |
| | THE PRODUCT IDENTITY NUMBER FROM THE |
| | STATE. IF THE PRODUCT DOES NOT HAVE |
| | STATEWIDE APPROVAL, SUBMIT AN APPLICA- |
| | TION FOR LOCAL PRODUCT APPROVAL OR SITE |
| | SPECIFIC FORM PER RULE 9B-72. SEE |
| | ATTACHMENT. WWW.FLORIDABUILDING.ORG |
| | |
| | 4) PRODUCT APPROVAL IS NEEDED FOR THE |
| | ROOFING PRODUCTS TO BE USED. ALSO THE |
| | WATERPROOFING MEMBRANE DEEDS PRODUCT |
| | APPROVAL. |
| | |
| | 5) PLEASE STATE THE MATERIALS WHICH WILL |
| | BE USED FOR THE FRAMING IN OF THE |
| | LATTICE AREAS. |
| | |
| | 6) PLEASE BE AWARE THAT ALL ROOF |
| | SHEETING HAS TO BE 5/8" OR GRATER. ARE |
| | YOU REPLACING THE WOOD AROUND THE NEW |
| | WINDOW FRAMES ONLY OR IN OTHER AREAS? |
| | |
| | 7) THE VALUE FOR THIS PROJECT IS TOO |
| | LOW. PLEASE ADJUST VALUE TO A FAIR |
| | MARKET PRICE. |
| | |
| | BUILDING PLAN REVIEW |
| | MYRON JACOBS |
| | TEL: (561)805-6726 |
| | FAX: (561)659-8026 |
| | [email protected] |
| | |
| | |
| | |
| | |
| | |
