| 2005-06-21 00:00:00 | BUILDING PLAN REVIEW: FAILED |
| | |
| | 1. PRODUCT APPROVALS SUBMITTED WITH |
| | PERMIT APPLICATION AFTER OCTOBER 1, 2003 |
| | ARE REQUIRED TO COMPLY WITH THE FLORIDA |
| | PRODUCT APPROVAL SYSTEM. FOR INFORMATION |
| | PLEASE SEE THE STATE WEBSITE AT |
| | WWW.FLORIDABUILDING.ORG. PRODUCTS WITH |
| | STATEWIDE APPROVAL ARE REQUIRED TO BE |
| | SUBMITTED WITH A COVER SHEET THAT LISTS |
| | THE PRODUCT IDENTITY NUMBER FROM THE |
| | STATE. IF THE PRODUCT DOES NOT HAVE |
| | STATEWIDE APPROVAL, SUBMIT AN APPLICA- |
| | TION FOR LOCAL PRODUCT APPROVAL OR SITE |
| | SPECIFIC FORM PER RULE 9B-72. SEE |
| | ATTACHMENT. WWW.FLORIDABUILDING.ORG |
| | |
| | SUBMIT FLORIDA PRODUCT APPROVALS FOR THE |
| | FOLLOWING: |
| | 1. TWO COMPONENT POLYURETHENE FOAM |
| | ADHESIVE |
| | 2. GAF RUBEROID MODIFIED BITUMEN ROOF |
| | SYSTEMS FOR WOOD DECKS |
| | 3. ARGUEY "S" CLAY TILE. |
| | |
| | 2. ON THE NOA FOR THE FLAT ROOF PAGES |
| | 2-8 CIRCLE THE PRODUCTS TO BE USED IN |
| | THE ROOF APPLICATION. |
| | 3. ON PAGE 26-7 CIRCLE THE TYPE OF BASE |
| | SHEET & FASTENING OPTIONS. |
| | 4. WHAT IS THE DESIGN PRESSURE? CIRCLE |
| | THE FASTENING OPTIION TO BE USED. |
| | 5. PLY SHEET: ARE YOU USING ANY OF THE |
| | PRODUCTS SHOWING? |
| | 6. MEMBRANE: DESCRIBE THE MEMBRANE TO BE |
| | USED. |
| | 7. SURFACING: CIRCLE IF BEING USED. |
| | 8. PAGE 32: SEE NOTE #7 FOR DESIGN |
| | PRESSURE ATTACHMENTS. |
| | 9. PAGE 32: WOOD DECK LIMITATIONS: |
| | CIRCLE IF REQUIRED. |
| | |
| | ANY QUESTIONS PLEASE CALL: |
| | LEA SMITH, BUILDING PLANS EXAMINER |
| | 805-6713 |
| | 5. |
| | |
