| 2005-06-08 00:00:00 | *********UNSAT ********** |
| | |
| | 1)NOTE: PLEASE SEE WIRING DIAGRAM |
| | SUBMITTED SHOWS A RISER DIAGRAM FOR A |
| | NEW SERVICE. IF A NEW SERVICEIS GOING TO |
| | BE INSTALLED, THIS MUST BE UNDER A |
| | SEPARATE PERMIT. |
| | PLEASE ONLY SUBMIT THE ELECTRICAL WIRING |
| | DIAGRAM RELATIVE TO POOL. |
| | IF NEW POOL PANEL IS BEING INSTALLED, |
| | THEN PLEASE INCLUDE OCP FROM EXISTING |
| | PANEL(IF EXSITNG) SIZE OF SERVICE ETC. |
| | PLEASE CLARIFY TYPE OF CONDUIT TO SUB |
| | PANEL. |
| | PLEASE SEE TYOE OF CONDUIT APPROVED FOR |
| | USE AND INSTALLATIONS. ENMT? |
| | |
| | 2)NOTE: PLEASE SEE THE NUMBER OS |
| | CONDUCTORS FROM MAIN PANEL TO SUB PANEL. |
| | |
| | THIS SEEMS TO BE MISSING EITHER THE |
| | NUETRAL OER EQUIPMENT GROUNDING?? |
| | 250.110,250.24, ETC. |
| | |
| | 3)NOTE: PLEASE SEE PLANS ARE BEING |
| | SUBMITTED SHOWING A GAS HEATER, YET, |
| | SPECS SUBMITTED SHOW A HEAT PUMP?? |
| | PLEASE CORRELATE. IF HEAT PUMP, PLEASE |
| | SEE NEXT COMMENT. |
| | |
| | 4)NOTE: PLEASE SUBMIT COMPLETE LOAD |
| | CALCULATIONS TO INCLUDE ALL NEW |
| | ELECTRICAL EQUIPMENT AND EXISTING |
| | ELECTRIC. PLEASE BE SURE ALL CONTINUOUS |
| | LOADS ARE SHOWN AT 125%. (HEAT-PUMP, |
| | POOL-PUMP) ETC. |
| | 220.31B |
| | |
| | PLEASE SUBMIT THE ABOVE INFORMATION FOR |
| | REVIEW. IF THERE ARE ANY QUESTIONS, |
| | PLEASE DO NOT HESITATE TO CALL. |
| | |
| | DEWEY PALMER |
| | ELECTRICAL PLAN REVIEW |
| | 561-805-6717 |
| | [email protected] |
