Plan Review Details - Permit 04080262
Plan Review Stops For Permit 04080262
Review Stop B BUILDING (STRUCTURAL)
Rev No 2 Status P Date 2004-10-08 Cont ID  
Sent By shill Date 2004-10-08 Time 10:26 Rev Time 1.00
Received By shill Date 2004-10-08 Time 10:26 Sent To PC
Notes
2004-10-08 00:00:00***PROVISO***SUBMIT REV FOR ADT1 FOR
 BLDGS
Review Stop B BUILDING (STRUCTURAL)
Rev No 1 Status F Date 2004-08-25 Cont ID  
Sent By csiegber Date 2004-09-20 Time 16:26 Rev Time 4.00
Received By shill Date 2004-08-24 Time 09:27 Sent To  
Notes
2004-08-24 00:00:00****CORRECTIONS****
 NOTE - CITY COPY RETAINED, AT SMH DESK
  
  
 SAMANTHA HILL, BUILDING PLANS EXAMINER
 561-805-6724 [email protected]
  
 1.)REGARDING THE SINGLE HUNG NON
 IMPACT WINDOWS, SHEETS 7&8 SHOW THE
 WINDOW AS 3/16"; THE TEST REPORT IS
 FOR A 3/16" FIXED, 1/8" SASH.CLARIFY.
  
 2.)SHEET R17 (RATIONAL ANALYSIS)
 REFERS TO A DIFFERENT TEST FOR THE
 S/H WINDOW, NON IMPACT THAN ON THE SITE
 SPECIFIC.PLEASE SUBMIT CALCULATIONS
 FOR THE SIZE BEING INSTALLED TO SHOW
 THAT IT MEETS THE DESIGN REQUIREMENTS.
  
 3.)THE TEST SIZE FOR THE NON-IMPACT
 HORIZONTAL ROLLER WINDOWS WAS 74X63.
 THE WINDOWS ON THE PLAN ARE 73X61 BUT
 YOUR SHOP DRAWINGS ARE FOR 72X54
 WINDOWS.PLEASE REVISE THE BUILDING
 PLAN TO REFLECT THE NEW WINDOW SIZE.
  
 4.)THE COMPARATIVE ANALYSIS CHART,
 R-23 FOR THE NON IMPACT HORIZONTAL
 ROLLER GIVES A LIMITATION OF 41.6;
 STILL NOT COMPLIANT FOR THE AVERAGED
 ZONE 4/ZONE 5 WINDOWS (42.6 REQUIRED
 BASED ON YOUR WEIGHTED CALCULATION).
 THIS IS FOR THE SIZE OF 72X56.5 ON THE
 CHART.PLEASE PROVIDE CALCULATIONS FOR
 THE COMPARATIVE ANALYSIS TO SHOW
 COMPLIANCE FOR ALL OF THE HORIZONTAL
 ROLLER WINDOWS.
  
 5.)FLORIDA STATE OR LOCAL PRODUCT
 APPROVAL REQUIRED FAC9B72 EFFECTIVE
 OCTOBER 1, 2003.WWW.FLORIDABUILDING.
 ORG.I HAVE OBTAINED THE STATE
 APPROVAL FOR THE WINDOWS BUT IT APPEARS
 THAT THE HURRICANE SHUTTERS DO NOT
 HAVE A STATE APPROVAL.SEE THE
 APPLICATION FOR LOCAL PRODUCT APPROVAL
 ENCLOSED.PROVIDE THE STATE PRODUCT
 APPROVAL AS REQUIRED OR APPLY FOR
 A LOCAL PRODUCT APPROVAL.
  
 6.)YOU INDICATE THAT YOU ARE
 INSTALLING A SINGLE 8'0 FRENCH DOOR BUT
 THE OPENING IS AN 8080; ELEVATIONS SHOW
 WINDOWS ON EITHER SIDE.PLEASE CLARIFY.
 EITHER REVISE THE DRAWINGS OR SUBMIT
 PRODUCT APPROVALS WHICH CONSISTENT WITH
 THE PLANS.
Review Stop I INCOMING/PROCESSING
Rev No 3 Status N Date 2004-09-20 Cont ID  
Sent By csiegber Date 2004-09-20 Time 16:26 Rev Time 0.00
Received By csiegber Date 2004-09-20 Time 16:26 Sent To B
Notes
2004-09-20 00:00:00TO SH DESK/RESUB
Review Stop I INCOMING/PROCESSING
Rev No 2 Status N Date 2004-08-10 Cont ID  
Sent By shill Date 2004-08-10 Time 08:35 Rev Time 0.00
Received By shill Date 2004-08-10 Time 08:35 Sent To B
Notes
2004-08-10 00:00:00TO AL DESK
Review Stop I INCOMING/PROCESSING
Rev No 1 Status N Date 2004-08-05 Cont ID  
Sent By csiegber Date 2004-08-05 Time 16:14 Rev Time 0.00
Received By csiegber Date 2004-08-05 Time 16:14 Sent To B
Notes
2004-08-05 00:00:00TO MISC BOX


Account Summary | Usage Policy | Privacy Policy
Copyright © 2005 – 2014, SunGard Pentamation, Inc & City of West Palm Beach, FL – All Rights Reserved