| 2001-12-03 00:00:00 | *************BUILDING UNSAT************* |
| | |
| | 1) IMPACT FEES MUST BE PAID TO PALM |
| | BEACH COUNTY, PLANS STAMPED BY THEM AND |
| | COPY OF RECEIPT SUBMITTED TO CITY OF |
| | WEST PALM BEACH BUILDING DEPARTMENT, |
| | BEFORE A BUILDING PERMIT CAN BE ISSUED. |
| | |
| | 2) A RECORDED COPY OF THE NOTICE OF |
| | COMMENCEMENT MUST BE SUBMITTED BEFORE A |
| | PERMIT CAN BE ISSUED. |
| | |
| | 3) PROVIDE CITY OF WPB DESIGN |
| | CERTIFICATION FORM SIGNED AND SEALED BY |
| | DESIGNER OF RECORD OR PROVIDE ALL OF THE |
| | INFORMATION ON THE PLANS. |
| | |
| | 4) PROVIDE AT LEAST ONE BATHROOM WITH A |
| | DOOR THAT HAS A 29" CLEAR OPENING TO |
| | TOILET FACILITIES. 97 FLORIDA |
| | ACCESSIBILITY CODE |
| | |
| | 5) THE GLASS BLOCK LOCATED IN THE MASTER |
| | BATH IS REQUIRED TO HAVE A UNIFORM FACE |
| | THICKNESS OF 0.25 INCH PER 97 SBC SECT. |
| | 2405.2.2(5) FOR GLAZING IN HAZARDOUS |
| | LOCATIONS. |
| | |
| | 6) PROVIDE FRAMING DETAILS FOR ROUND |
| | WINDOW AT CABANA BATH. |
| | |
| | 7) SEMCO AND HUGHES HAVE BEEN PURCHASED |
| | BY UNITED STEEL PRODUCTS. PLEASE NOTE |
| | THAT SOME OF THE CONNECTORS VALUES HAVE |
| | CHANGED AND OTHERS ARE DISCONTINUED. |
| | PLEASE REVIEW AND REVISE CONNECTOR |
| | SCHEDULE AS NECESSARY. CHECK WITH THE |
| | MANUFACTURER FOR VALUES WHEN USING LESS |
| | THAN THE NUMBER OR SIZE OF FASTENERS |
| | SPECIFIED BY THE CATALOG AND WHEN |
| | ANCHORS ARE SPACED LESS THAN 8" APART. |
| | |
| | 8) THE HUS 210 HANGER CAN NOT BE |
| | MODIFIED AS INDICATED BY DETAIL 11 ON |
| | A-9. REBENDING THE FLANGE WILL WEAKEN |
| | THE HANGER. PLEASE INDICATE AN |
| | APPROPRIATE HANGER. |
| | |
| | 9) THE DETAIL FOR THE GIRDER HANGER AT |
| | THE COVERED PATIO (NEAR CABANA BATH) IS |
| | INCORRECTLY REFERENCED AS DET.5/A-5 ON |
| | SHEET A-6. |
| | |
| | 10) THE PRODUCT APPROVALS FOR THE ROOF |
| | TILES AND THE SINGLE HUNG WINDOWS |
| | EXPIRED PRIOR TO APPLICATION FOR PERMIT. |
| | PLEASE SUBMIT CURRENT PRODUCT APPROVALS. |
| | |
| | 11)PROVIDE PRODUCT APPROVAL FOR EXTERIOR |
| | DOOR WITH SIDELITE AS INDICATED ON PLANS |
| | AT FRONT ENTRY. THE GLAZING IN THIS |
| | ASSEMBLY WILL REQUIRE IMPACT GLASS OR |
| | STORM PANELS. |
| | |
| | 12) PROVIDE CITY OF WPB SITE SPECIFIC |
| | PRODUCT APPROVAL FORM FOR BUTT GLASS |
| | ASSEMBLY IN ADDITION TO DRAWING. THE |
| | FORM MUST BE SIGNED, SEALED AND DATED BY |
| | THE ENGINEER CERTIFYING THE PRODUCT AND |
| | BY THE DESIGNER OF RECORD FOR THE |
| | STRUCTURE APPROVING IT FOR USE IN THE |
| | STRUCTURE. |
| | |
| | 13) PROVIDE PRODUCT APPROVALS FOR THE |
| | LARGE ARCHED TOP FIXED GLASS WINDOWS. |
| | THE PRODUCT APPROVALS SUBMITTED ARE FOR |
| | F.G.WINDOWS WITH A MAXIMUM HEIGHT OF 60" |
| | AND A MAXIMUM WIDTH OF 120". |
| | |
| | ROBERT MCDOUGAL |
| | BLDG. PLAN REVIEW |
| | (561)659-8096 EXT.8202 |
